Lighting

Serfas' Thunderbolt Headlight delivers 90 lumens in an extremely versatile, USB-rechargeable package. Attach the water-resistant silicone body nearly anywhere on your bike, and use the high, low, or two flash modes to make sure cars, cyclists and pedestrians can see you at night. At just 50 grams, you won't even notice it's on your bike — but others will!

Be safe out there with Serfas' TL-STN Seat Stay Taillight. This water-resistant safety beacon will get you noticed out on the road with a large, super-bright 1/2-watt red LED flanked by 6 brilliant smaller LEDs. Plus, the weatherproof silicone body stretches to easily mount to any tube on your bike. Use a few Seat Stay Taillights for 360-degrees of visibility! This great light has steady, strobe and flash modes.

Topeak's RedLite II mounts on seatposts, seat bags and seatstays. Its 4 super-bright LEDs shine through a 220-degree, wide-angle, reflective lens to alert traffic approaching from almost anywhere. The RedLite's watch-style lithium batteries (included) offer up to 100 hours of run time. Plus, you can choose from constant or blinking mode.

With the push of a button, the 2’Fer can switch between a white 60 lumen front light and a red 20 lumen rear light. Holding the button for 2 seconds turns the light on and off, and pushing the button once changes modes between white solid, red solid, white flashing and red flashing. The light also remembers which mode you were last using and turns on in that mode. - Charging cable included, no tools required - Lithium Polymer battery - Waterproof to IP-65 standard - 3 hour recharge time - 18g / 0.04lb each As Front: - 60 Lumens - Runtime: High 1.5hrs, Flashing 5hrs As Rear: - 20 Lumens - Runtime: High 1.5hrs, Flashing 5hrs

Being Seen From All Angles Has Never Been Easier We understand being able to see in the dark is important, but we also believe that so is being visible to cars. A recent study by the National Highway Traffic Safety Administration (NHTSA) showed 27% of bicycle accidents are side impacts and 30% of fatalities occur in intersections (between 2010-2017). Being seen from all angles while cycling has never been easier. The Grid Side Beacon was imagined to work in with head/tail lights to keep you more visible from a full 360 degrees. Designed to be mounted to either side of your fork with reusable silicone straps, the Grid Side Beacon can be used as a stand-alone light, or as part of our Luminate 360 Light Set. Spec'd with eye-catching amber-colored LEDs, the weatherproof, rechargeable Grid Side Beacon set comes with a dual-headed charger and has a runtime of up to 6 hours for multiple days of commuting illumination. - 58 grams - Charges via any standard USB port - ip-65 submersible - ingress protection rating or "IP rating," is a techy way to describe the level of water- and dust-proofness of a product. this light meets the IP-65 standard, which means it is totally protected against dust/grit and protected against low-pressure water jets from any direction. - High/Solid 85 lumen, 1.5 hr runtime; Low/Solid 50 lumen, 3 hr runtime; High/Flash 85 lumen, 3 hr runtime; Low/Strobe 50 lumen 6 hr runtime

Compact and super bright LED front (2 x 0.3W)/ rear (3 x 0.2W) lights to illuminate you way home after dark. RedLite Mini USB with Integrated mount clip attaches to any Topeak bag with ease. - Lamp: 2 super bright 0.3W white LED’s (WhiteLite), 3 super bright 0.2W red LED’s (RedLite) - Battery: 3.7V 330mAh Lithiumn Ion (integrated) - Control: 3 modes - Burn Time (approx): WhiteLite: 7 hr Blinking / 3 hr 0.5W Constant / 35 hr Rapid Blink RedLite: 6 hr Blinking / 2.5 hr 0.5W Constant / 15 hr Blink Sequence

Maintain Visibility All the Time. As with all the lights in the Recon series, the new Recon TL200 has a compact design, an integrated power indicator, complies with the ANSI standard and is IPX7 certified. Additionally, the smart light sensor can auto adjust the light output, day or night, to ensure you can be seen all the time. - Maximum output to 200 lumens - ANSI-Standard certified lumen output and runtime - Water proof to IPX7 standard - Two-lens focused and dispersed optics with side light design for over 270-degrees of visibility - Power status indicator alerts remaining run-time before powering off - Light memory mode - Compatible with Rev Comp, Compel, Roost and Prompt series helmets - Compatible with saddle rail mount, providing optimal angle for visibility

SMARTER VISION Aside from outstanding lumen capacity and industry-leading usage time, the Recon HL1800 monitors ambient light to change output accordingly, helping to save battery power for when you need it. Shines brighter, runs longer and works smarter. FEATURES - Smart Mode light sensor monitors ambient light to adjust light output accordingly - The Recon 1800 can pair with ANT+ compatible computers to view battery information on the computer screen.* - ANSI certified lumens and run time - Focused optics with side light design for over 270-degrees of visibility - Heat-dissipating CNC-machined aluminum casing - Power status indicator alerts remaining run-time before powering off - Includes adjustable GoPro mount - *Giant recommends operating the HL1800 in manual mode when using Garmin computers. SPECIFICATIONS - Size: 103x32x47mm - Weight: 190g without mount - Colors: Black - Output: 1800 lumens - Runtime: High (1800LM) 1.5hrs, Middle 3.5hrs (900LM), Low 7hrs (450LM), Smart (100LM>450LM with flash output in Day) 40hrs; (900LM with steady output at Night) 3.5hrs, Flash (100LM) 65hrs - Battery: Li-Ion polymer battery (6400mAh) - Water resistance: IPX6 - Certifications: ANSI-Standard FL-1

Charge, Click, Go Bright And Easy Batteries, what a hassle. This small-but-mighty safety light set is rechargeable, so you’ll never have to change batteries again. Just charge with the micro-USB cable and attach using the handy silicone mounts. Then click once for power, and traffic can see you! - High 60 lumen - High 20 lumen - Versatile Silicone Mounting System - Waterproof To IP-65 Standard. - 3 Hour Recharge Time.

Enhanced Side Visibility Design. 130 Lumens / 2 Solid & 3 Flash Modes. USB C Rechargeable. Unique Fin Lens Design Provides Enhanced Long Distance Visibility While Creating Generous Attention-Grabbing Side Illumination Features: - 130 Lumens (Daytime Flash) - Three Super Bright CREE LEDs - Finned Lens Design Provides 180 Degree Visibility - LED Charge Indicator - Auto Safe Mode* - Daytime Flash Mode - Up To 22 Hours Runtime - USB C Rechargeable - Aero Post Compatible Bracket Solid Modes: - High (50 Lumens): 1 hr 30 mins - Low (15 Lumens): 5 hrs 30 mins Flash Modes: - Daytime Flash (130 Lumens): 19 hrs - High Flash (75 Lumens): 10 hrs - Low Flash (20 Lumens): 22 hrs - *Auto Safe Mode Extends Runtime Additional 45 mins - Weight: 52 Grams w/ Bracket - Battery: 500 mAh Lithium Polymer

Charge, Click, Go! Hassle-Free Safety Light Just press the lens and, click, traffic can see you! A silicone mount lets you attach this powerful little light almost anywhere, and the handy LED fuel gauge tells you when it’s time to recharge with its micro-USB cable. No more batteries — just charge, click and go! - Charging Cable Included, No Tools Required - Lithium Polymer Battery - Waterproof To Ip-65 Standard - 3-Hour Recharge Time

The 49n Ultra Doppler USB Rechargeable headlight provides high visibility with super-bright LEDs that mount in seconds thanks to its highly versatile IPX3 waterproof-rated silicone body. The Ultra Doppler is USB rechargeable, saving money while reducing your footprint. Ultra Doppler Headlight Specifications - 38 Lumen super bright LED - 3-Modes - High 5 Hour burn time - Medium 9 Hour burn time - Flash 9 Hour burn time - Cable-free integrated USB 2.0 charging - 180 Side visibility - IPX3 Waterproof rating - Quick release, multi-mount silicone body - Red low battery indicator - Green fully charged battery indicator - 2 Hour charging time - Fits all bar and seatpost diameters - Black body, clear lens - 50g

USB rechargeable, high-performance optical lens, low profile aluminum front light provides 450 lumens brightness with good value. Rubber strap provides bi-directional tool-free mounting and easy removal on aero / round handlebars or helmet. - Strap mount fits integrated bar/stem combo, aero / round handlebars, & helmet - Low battery indicator - Max Luminous Intensity: 450 Lumens - Lamp: 2 white high power LED’s - Battery: 3.7V 940mAh Lithium Ion (integrated) - Burn Time (approximate): 1.5hr (High) / 3hr (Middle) / 5hr (Low) / 10hr (Blinking) - Charge Time (approximate): 2 hr Micro USB (5V 500mA input) - Material: Aluminum / Engineering grade polymer - Waterproof: IPX 6 - Size: 6.7 x 4.7 x 2.7cm / 2.6” x 1.9” x 1.1” - Weight: 73g / 2.57oz

X8 Front Light: - High-quality PREMIUM design - AWARD-WINNING light distribution technology - Easy-to-use LCD DISPLAY shows various information to the user - Extensive side lighting for INCREASED VISIBILITY AND SAFETY - MEMORY FUNCTION remembers the last mode used - Fully USB-RECHARGEABLE - NEW snap-tight bracket - 80 LUX - 6 Modes - Run time on Eco = 24 hrs - Run time on High Steady = 3 hrs XBR Rear Light: - ACCELERATION SENSOR - when speed is reduced by more than 1.6 m/s (5.76 km/hr or 3.58 mph) an additional LED is switched on - Light guide for INCREASED VISIBILITY AND SAFETY - Brake light is 3 TIMES BRIGHTER than normal output in Steady mode - ADDITIONAL OPTIC in front of LED at lower end of light guide - MEMORY FUNCTION remembers the last mode used - Fully USB-RECHARGEABLE - Bracket with flexible mounting option -.20 LUX - 7 Modes - Run time on Eco = 36 hrs - Run time on High Steady = 10 hrs

Charge, Click, Go Click Power Free yourself from the hassle of batteries! This small but essential accessory makes you visible to traffic. Bright side beams throw off additional light, and the silicone mount fits almost any handlebar. A Micro-USB cable makes it easy—just charge, click and go! - Charging cable included, no tools required - Lithium polymer battery - Waterproof to IP-65 standard - 3-hour recharge time

The NiteRider Sentinel 250 is designed to increase cycling safety by way of 2 varying flash patterns and 2 steady beams (High/Group Ride Mode). Behind the durable red lens and casing are two powerful LEDs that emit 250 lumens in the brightest Daylight Visible Flash setting, allowing you to be seen day or night. For enhanced safety, the Laser Lane modes (3) are designed to project ultra-bright laser lines on the ground. This creates a virtual lane for the rider, further increasing visibility. - The Sentinel 250 complies with FDA standard for lasers, notice No. 50, 2007 - Daylight Visible Flash (DVF) - Highly visible laser lanes - All in one, Laser and tail light! - Convenient USB rechargeable - Group Ride Mode – be seen without distracting fellow cyclists - Easy on and off seat post strap mount with quick release tab - FL1 Standard IP64, dust and water-resistant WARRANTY - The Sentinel 250 is backed by NiteRider's lifetime warranty that covers any defects in material and workmanship, mechanical components (housings, covers, mounts and fasteners) and LEDs. SYSTEM INCLUDES - LED Tail Light w/ Laser Lanes - Seat post Mount - USB Cable

The NiteRider Swift 300 delivers everyday reliable performance in an economical ultra compact head light. Sporting features like an easy on and off handlebar strap mount, low battery indicator and to top it off, it's USB Rechargeable; making it the perfect light of choice for commuters and cycling enthusiasts. Although small in size, make no mistake; the Swift 300 packs a big punch with a maximum light output of 300 lumens! Powered by an internal Lithium Ion battery, in Walk Mode, the Swift 300 can run for up to twenty-seven hours before it needs a charge. - Highly durable design made with fiberglass reinforced plastic - Smooth 300 lumen beam pattern in an ultra compact and lightweight design - Innovative Collimator Lens – optimizes your field of view - Built-in, easy on and off handlebar strap mount - 4 Light Levels plus 1 Daylight Flash Mode - Fuel Gauge / Battery Level Indicator - FL1 Standard IP64, dust and water-resistant - Convenient USB rechargeable WARRANTY - The Swift 300 is backed by NiteRider's lifetime warranty that covers any defects in material and workmanship, mechanical components (housings, covers, mounts and fasteners) and LEDs. SYSTEM INCLUDES - LED Light Head - Internal Li-Ion Battery - Build-in, Handlebar Mount - USB Charging Cable

Topeak's RedLite Aero is sleek and fits most seatposts or seatstays with near-perfect aerodynamic precision. This ultra-bright light uses 3 super-bright red LEDs that get you noticed. The AAA battery (included) offers up to 80 hours of run time with constant and blinking modes.

Helmet mount for all systems that use the slider mounting clip. Not compatible with Lumina Series Lights. System Compatibility - Pro Series - HID Series - Classic Plus & Select - Evolution & Digital Evolution - HeadTrip & Digital HeadTrip - TrailRat & TrailRat Select - RoadRat - Digital Patrol LED - Digital Patrol - Pre 2001 systems

In-vehicle charging adapter for charging USB rechargeable NiteRider lighting systems. Charging cable not included. System Compatibility - All Lumina Series - Swift Series - MiNewt Cordless Series - MiNewt Mini Series - Lightning Bug 120 - Sentinel - Solas - Omega - Sabre - Sentry Aero - Stinger

The NiteRider Hardshell Helmet Mount gives you the option to mount your head light directly onto your hardshell helmet using high strength 3M VHB adhesive. ?Not compatible with Lumina Series Lights. System Compatibility - Pro Series - HID Series - Classic Plus & Select - Evolution & Digital Evolution - HeadTrip & Digital HeadTrip - TrailRat & TrailRat Select - RoadRat - Digital Patrol LED - Digital Patrol - Pre 2001 systems

The Gino Light Mount provides a mounting point for handlebar lights wherever there is an M5 threaded eyelet on your frame. - 6061 Aluminum - 30g - 26.0mm outside diameter - 5mm mounting bolt

- Can be used on arm, leg, backpack, or bike - 4-LED design for 360 visibility - Built-in passive reflective strips - Water resistant - Mode: Flashing Off - CR2032 Battery (included) - 75 hour run time - Sold individually

Compact cycling safety light with two bright LEDs and a 200-lumen Daytime Flash mode. It features a super lightweight, yet durable co-molded construction that is IPX7 (waterproof) rated. NEW -- Up to 20 hours of runtime (eight hour increase) and up to 200 lumens (20 lumen increase) of output. And it features an integrated USB stick for convenient cable-free recharging. The KTV Drive Front offers five output modes. Specs - Max Lumens: 200 - Weight: 47.5g - Max Runtime: 20 hours - Recharge Time: 2:15

Keeping the light stable and centered on the handlebar, the stem mount allows for a clean, uncluttered handlebar.

Bright and efficient multi-purpose e-bike cycling light. Durable, heat-dissipating CNC machined aluminum construction. Two ultrahigh-output LEDs deliver up to 500 lumens. Enhanced MOR (Maximum Optical Reflection) lens with built-in side visibility. Intelligent Auto Day/Night dim mode. E-bike compatible 6 – 12v input, 6w easily plugs into batteries from top makers including Bosch, Shimano and Yamaha. Includes CNC fork mount and 140cm long power cable. Our e-bike lights are powered by the motor of an e-bike and need to be manually installed. Proper installation may require some disassembly of the bike and motor (depending on make/model/battery type) and additional wiring to connect the light to the motor. Please contact the e-bike or motor manufacturer for installation instructions. It is highly recommended to have a trained e-bike professional install your lights for you. Disclaimer: Direct X-Lock Mounting System Not compatible with all stems. Please see installation manual for stem compatibility. - 500 Lumens - Includes aluminum CNC fork and E-BIKE Stem mount - Enhanced Maximum Optical Reflection (MOR) lens - E-bike compatible 12 – 48V input - 130 cm power cable included - IPX7 water resistant - Dimensions: 44.5 x 41 x 25mm / 1.75 x 1.61 x 0.98" Motor Compatibility - Bosch: 6V, 12V - Shimano: E5000, E7000, E6100, E6110, E9000, E8000, E8080, E6002, E6012 - Yamaha: PWse - BionX - Brose Drive S (2018) - Continental: 48V Prime, 48V Revolution

High-performance e-bike cycling light. Durable, heat-dissipating CNC machined aluminum construction. Two ultrahigh-output LEDs deliver up to 1,000 lumens. Enhanced MOR (Maximum Optical Reflection) lens with built-in side visibility. Intelligent Auto Day/Night dim mode. E-bike compatible 6 - 12v input, 6w easily plugs into batteries from top makers including Bosch, Shimano and Yamaha. Includes a Direct X-Lock and aluminum CNC fork mount and 140cm long power cable. Our e-bike lights are powered by the motor of an e-bike and need to be manually installed. Proper installation may require some disassembly of the bike and motor (depending on make and model battery type) and additional wiring to connect the light to the motor. Please contact the e-bike or motor manufacturer for installation instructions. It is highly recommended to have a trained e-bike professional install your lights for you. *Direct X-Lock Mounting System not compatible with all stems. Please see installation manual for stem compatibility. Specs - Max Lumens: 1000 - Dimensions: 44.5 x 41 x 31mm / 1.75 x 1.61 x 1.22"

Featuring 800 lumens of crystal-clear illumination, the Lite Pro 800 Switch (High Volt) e-bike cycling light maximizes usable output with its enhanced Maximum Optical Reflection (MOR) lens while a compact CNC-machined aluminum body is equipped with cooling fins to maximize heat dissipation. Compatible with higher-voltage e-bike inputs (12-48v), the Lite Pro draws 8 watts during operation and easily plugs into batteries from top makers including Bosch, Shimano, and Yamaha. An integrated remote switch simplifies operation while the inclusion of both an e-bike stem mount and aluminum CNC fork mount maximize the light's versatility. A 130cm power cable is included. - Max Lumens: 800 - Weight: 173g

- Waterproof IPX7: Operates even after 30 minutes of submersion in a depth of 1 meter - 3x brighter than EL135 - OptiCube lens technology - Low battery indicator - Mode memory function - Two light modes (Constant / Flashing) - Replaceable bracket spacer - FlexTight bracket - Runtime : Constant: 30 hours (50 lumens) (Approx.) Flashing: 250 hours (50 lumens) - Battery type : 2 x AA alkaline battery - 5 ultra bright LEDs - Design offers high visibility - 3 modes: rapid, flashing, constant - Run time: R - 60h to 120h, F - 40h to 120h - 2x AAA batteries included - FlexTight bracket

Compact and lightweight rear light with 3 super bright 0.2W red LEDs to provide excellent visibility. Rubber Strap allows tool-free mounting and removal from seatpost. Integrated mounting clip attaches to any Topeak bag with ease. - Lamp: 3 super bright 0.2W red LED’s - Battery: 3.7V 330mAh Lithiumn Ion (integrated) - Control: 3 modes: Blinking / Constant / Sequence - Burn Time (approx): 6 hr Blinking / 2.5 hr 0.5W Constant / 15 hr Blink Sequence

Not too long ago a 550-lumen headlight for this price would have been a pipe dream, but now the Dayblazer 550 is a dream come true! AWESOME LIGHT. AWESOME PRICE. Featuring eye-popping BLITZ Daytime Running Mode to grab the attention of cars, IP-67 submersibility and ample side visibility, the Dayblazer 550 puts light where riders need it most. - Lithium Battery Packaged: In Product - Recharge Type: Micro-USB rechargeable — Charges via any standard USB port (charging cable included) - Number of Batteries: 1.00 - Brightness: Up to 550 lumens - Batteries Included: Batteries Included - Lithium Battery Energy Content Watt Hours: 10.1 - Battery Type: Lithium Ion - Country of Origin: China - Batteries Needed: Yes - Recharge Time: 3-hour recharge - Mounting Options: Swivel mount - A rotating mount allows the light to be adjusted to center on the road! This versatile silicone mount fits handlebars from 22–35mm and can be used to strap to some helmets. Universal Light Mount action-camera-style mount sold separately - Weight: 59 grams Run Time: - Blitz mode: 1 hour at 550 lumens - High mode: 1.5 hours at 275 lumens - Low mode: 5 hours at 75 lumens - Pulse mode: 5.5 hours at 100 lumens - Strobe mode: 12 hours at 65 lumens Water Resistance: - IP-67 submersible - Ingress protection rating, or "IP Rating," is a techy way to describe the level of water- and dust-proofness of a product. This light meets the IP-67 Standard, which means it is totally protected against dust/grit and fully protected against the effects of immersion between 15cm and 1 meter for 30 minutes.

- Velo Wireless computer with AMPP 100 headlight and ViZ 100 rear light

The Grid Side Light Set is designed to be mounted to either side of your fork and is spec'd with eye-catching amber-colored LEDs. Supported by a study by the National Highway Traffic Safety Administration (NHTSA) that showed 27% of bicycle accidents are side impacts and 30% of fatalities occur in intersections (between 2010-2017). Being seen from all angles while cycling has never been easier with this weather-proof, rechargeable Grid Side Light Set. - COB LEDS - Pack more LEDs in a small package with a powerfully even and wide light array to help you to be seen while riding in any environment. - ECO MODE - Extremely long run time in our Eco Mode for those riding all week, or on long daily rides. Eco Mode also extends the Pulse and Strobe modes by two hours. - USB-C - Modern USB plug standard to ensure you can stay charged and ready to ride - BATTERY GAUGE - Small color LEDs in the power button help you monitor your light battery power, to tell you when it's time to charge your light once more. Green = 100-50%, Orange = 50-25%, Red = 25-0% - MEETS ANSI FL-1 STANDARD - This standard was created by the American National Standards Institute (ANSI) to provide consistent performance measurements for handheld lights. - IP-65 - Ingress protection rating or 'IP rating', is a techy way to describe the level of water and dust proofness a product has. This light meets the IP-65 standard, which means is totally protected against dust/grit and is fully resist strong jets of water from all directions. - LIMITED LIFETIME WARRANTY - Restrictions and conditions apply.

CatEyeSYNC - ONE touch control -Turn one light on and all your Sync lights come on. Using Wireless technology, CatEyeSYNC lights provide the ease of synchronizing all lights to operate as one. Check battery levels, customize modes , set brake mode function and synchronize flash pattern preferences using your Smartphone. Simple and superior 360-degree visibility is one touch away with up to 7 lights synced to operate as one. - When used with the other lights from the CatEyeSYNC family, SYNC Wearable gives you an extra way to be seen, day or night. Using the mobile app, SYNC Wearable can be synchronized with SYNC Core and SYNC Kinetic for 360-degree visibility. - Rechargeable wearable safety light - Clip-on bracket for easy installation to backpacks, saddle bags or clothing - Rubber strap bike mount included - Battery Auto Save (The mode automatically changes to flashing when the battery power gets low) - Excellent daytime visibility in Daytime HyperFlash mode - Group Ride mode eye-friendly to team riders behind - Superior side visibility - OptiCube lens technology - Li-polymer rechargeable battery - USB rechargeable (Micro-USB cable included) - 6 modes - Mode memory function SPECS - Synchronize all SYNC lights - One touch turns all lights on/off - Synchronize light modes and flashing timing for enhanced visibility (SYNC Wearable, SYNC Kinetic) - Synchronized Kinetic mode for dynamic visibility (when used with SYNC Kinetic) - Control with smartphone app - Pair the lights (up to seven lights) - Customize light modes - View remaining battery level - Turn on/off the lights - Turn on/off synchronization with other lights - "Find me" function lets the light flashing by tapping the button on app

Largest Easy-Touch Button In The Industry Keep focused on the trail instead of hunting for buttons. Designed for simplified no-look use, especially when helmet mounted, with easy touch oversized five-point button sensor and LED backlit battery level meter. - USB-C Charging - Go-Pro® and Bar Bracket Included. Rugged looks with impressive light output and smart features, our all new completely redesigned Serfas© True Series MTB headlights will illuminate your path. The Serfas© True 1300 MTB features 1300 lumens of crystal clear bright night time illumination to make out every turn of the trail and 1300 lumens in Flash mode to make sure all eyes are on you. A smart grippy extra large power button with LED backlit battery level indicator ensures surefire operation and convenient battery monitoring so there are no unwelcome surprises on the trail. Go-Pro® and Bar Bracket Included. TSL Headlight Models w/ Button Lock – True Series Headlight User Manual Limited Lifetime Warranty Serfas® warrants to the original purchaser that the product is free of defects in material, construction, and/or workmanship for the lifetime of the product. Battery Warranty – One Year Coverage Serfas® batteries are covered by a 1 year warranty from the original date of purchase. Features: - 1300 Lumen Output - Oversize Easy-Touch Power/Mode Button - Backlit LED Battery Level Indicator - USB-C Charge Port w/ 1A Fast Charging - Last Mode Memory (In Solid Mode) - Go-Pro® and Bar Bracket Included - Removable Li-Ion Battery - Convenient Magnetic Battery Removal - No Tools Required Installation - IPX6 Water Resistance Rating Specs: Solid Mode: - High 1300 Lumens – 1.5 hrs - Medium 650 Lumens – 3.25 hrs - Low 320 Lumens – 7 hrs Flash Mode: - Daytime Flash 1300 Lumens – 49 hrs - Low Flash 190 Lumens – 51 hrs Weight : 128 Grams w/ Bracket Battery: 1-Cell Li-Ion, 3350 mAh Charge Time: 4.5 hrs (Using 2A USB Wall Charger) Color: Black *USB Charging: To ensure stable charging please be sure the USB-C male connection is fully and firmly clicked into place in the headlight's USB-C female charge receptacle to ensure a properly secured connection (an audible click will not always be heard). The integrated headlight battery charge level indicator will display five solidly illuminated blue LED dots when full charge is achieved.

SEEMEE SEATPOST MOUNT for Magicshine Seemee 60, 100, 180, and 200. Including an adjustable silicon seat-post mount.

USB Rechargeable, super bright, compact, quick and easy - there's no reason not to grab a pair of ORB's for your next ride. Features - USB rechargeable - Simple,lightweight, and compact design - Easy installation and switch operation - Universal rubber band - Mount size: ~22-32mm Modes/Run Time - Constant: 2.5 hours - Rapid flashing: 5.5 hours - Slow flashing: 6 hours

The NiteRider Tail Light Mount – Seatstay and Seatpost is our classic seatpost mount design that gives riders the option to mount their tail light to their seat stay, using the included seat stay clamp. System Compatibility - Sentinel - Solas - Sabre - CherryBomb - TL 5.0 SL

Replacement battery for 2019 True Series MTB & Road headlights. Plastic storage case included.

With 2 LEDs pumping out 65 lumens of power, 270 degrees of visibility, and Blackburn's unique BLITZ daytime running mode, the DAYBLAZER 65 is focused on safety, so you can focus on your ride. Also, because of the narrow profile of our unique mounting bracket, the DAYBLAZER 65 tail light can be mounted to just about anything you can think of from round or aero seat posts, to seat stays, to a rear rack, or your back pack - Charging cable included, no tools required - Lithium Polymer battery - Waterproof to IP-67 standard - TIR Lenses - LED Fuel Gauge/Charge Indicator - Polycarbonite Construction - 2 hour recharge time - Runtime: Solid 1.6hrs (50 lumen), High Flash/Low Strobe 3hrs (65 lumen)/6hrs (35 lumen) - 48g

Charged to be seen! The TailLux 25 USB design features convenient cable-free charging with a direct USB port plug. Two super-bright LEDs provide 25 lumens and three light modes, so you can be seen up to 2km away—even on the darkest nights. Bi-directional tool-free mounting and removal are accomplished by a single silicone strap, making it simple to use on seatposts, seatstays, or Topeak bags. - Max Luminous Intensity: 25 Lumens - Lamp: 2 super bright red LED's - Light Housing: Engineering grade polymer - Battery: 3.7 V 320mAh Lithium Ion (integrated) - Control/Burn Time: 3 modes / 3 hr (High) / 30 hr (Low) / 40 hr (Blinking) - Charging: USB port / 2 hr - Mounting: Fits aero or round seatposts (25.4 – 34.9mm), seatstay, and Topeak bags - Waterproof IPX 6 - Size: 6.3 x 2.7 x 2.5cm / 2.5" x 1.1" x 1" - Weight: 30g / 1.06oz (w/ mounting clip)

A powerful, Bluetooth connected light pair! PowerLite Combo includes two Bluetooth 5.0 connected lights – the WhiteLite 800 BT high-powered 800 lumen front light and the RedLite 80 BT 80 lumen rear safety light. The red rear light is wirelessly controlled from WhiteLite 800 BT.

Take charge of the night! The HeadLux 100 USB features convenient cable-free charging with a direct USB port plug. Two super-bright 0.5W white LEDs provide up to 100 lumens with three light modes so you can see even on the darkest nights. Bi-directional tool-free mounting and removal are accomplished by a single silicone strap making it simple to use and a great value. - Max Lumens: 100 Lumens - Lamp: 2 super bright 0.5 W white LEDs - Light Housing: Engineering grade polymer - Battery: 3.7V 500mAh Lithium Ion (integrated) - Control/Burn Time (approx): 3 Modes / 1.5 hr (High) / 3.3 hr (Middle) / 40 hr (Blinking) - Charging: USB port / 2 hr (approx) - Mount: Fits integrated bar/stem combo, and aero / round handlebars - Waterproof IPX 6 - Low battery indicator - Size: 6.9 x 4.3 x 2.2 cm / 2.7" x 1.7" x 0.9" - Weight: 32g / 1.13oz

The 49n Ultra Doppler USB Rechargeable tail light provides high visibility with super-bright LEDs that mount in seconds thanks to its highly versatile IPX3 waterproof-rated silicone body. The Ultra Doppler is USB rechargeable, saving money while reducing your footprint. Ultra Doppler Tail Light Specifications - 3 super bright LEDs producing 7 Lumens - 4-Modes - 3 Strobe patterns - 12 Hour burn time - Steady on 9 Hour burn time - Cable free integrated USB 2.0 charging - 180 Side visibility - IPX3 Waterproof rating - Quick release, multi-mount silicone body - Red low-battery indicator - Green fully charged battery indicator - 2 Hr charging time - Fits all bar and seatpost diameters - Black body, red lens - 40 grams

Battery Replacement Guide For E-Lume Series Headlights: - E-Lume USL-200/250, 1-Cell Li-Ion 1400 mAh (ESB-1400) - E-Lume USL-450/500, 1-Cell Li-Ion 2200 mAh (ESB-2200) - E-Lume USL-600/650/850/900, 1-Cell Li-Ion 2600 mAh (ESB-2600) - E-Lume USL-1100/1200, 2-Cell Li-Ion 2200 mAh (ESB-4400) - E-Lume USL-1500/1600, 2-Cell Li-Ion 2600 mAh (ESB-5200) - Battery Removal/Installation Instructions Included - Allen Key Tool Included

Pumping out an attention-grabbing 300 lumens with OptiCube lens technology, the versatile ViZ300 stands out with the power of Daytime Hyperflash mode and the friendliness of Group Ride mode. - 3 LEDs (300 lm) - Highly visible during daytime - 300 degree visibility - Long rear beam projection - OptiCube lens technology - Lithium-ion rechargeable battery - USB rechargeable (Micro-USB cable included) - Low battery indicator - 4 modes *Charging time: 3h - Mode memory function - Battery Auto Save (The mode automatically changes to flashing when the battery power gets low.) - New seat post bracket SP-15 which fits contemporary (kammtail) aero seatpost - Snap System Run time: - Constant (30 lumens):5 hrs - Flashing (30 lumens):45 hrs - Group Ride (100 lumens):8 hrs - Daytime Hyperflash (300 lumens):10 hrs

- Waterproof IPX7: Operates even after 30 minutes of submersion in a depth of 1 meter - 3x brighter than EL135 - OptiCube lens technology - Low battery indicator - Mode memory function - Two light modes (Constant / Flashing) - Replaceable bracket spacer - FlexTight bracket - Runtime: Constant: 30 hours (50 lumens) (Approx.) Flashing: 250 hours (50 lumens) - Battery type: 2 x AA alkaline battery - Lightweight and simple light with durable aluminum body - Lens functions as power & mode button - Versatile rubber mount strap - Rear light features an angled strap to compensate the seatpost's angle - Run time: Up to 100 hrs - Battery type: 2x CR2032

2'fers got your 6'…or your 12'. The Grid 2'fer is a high-powered front and rear light. A quick double-click of the power button switches it from white to red. With four mode options, you can choose if you need high lumen power or extended run time. Ready for those commuting in the city, riding the open roads, or heading to their local trail. Grid 2'fer offers the right light, front or rear, with plenty of rechargeable power to keep you visible any time of day. COB LEDS — Pack more LEDs in a small package with a powerfully even and wide light array to help you to be seen while riding in any environment. ECO MODE — Extremely long run time in our Eco Mode for those riding all week, or on long daily rides. Eco Mode also extends the Pulse and Strobe modes by two hours. USB-C — Modern USB plug standard to ensure you can stay charged and ready to ride BATTERY GAUGE — Small color LEDs in the power button help you monitor your light battery power, to tel you when it's time to charge your light once more. Green = 100-50%, Orange = 50-25%, Red = 25-0%

The compact, durable AMPP 800 offers superior beam patterns on or off road. Combined with its three-level battery indicator means there is always time to get home. FEATURES: - High-power rechargeable headlight (800 lm) - Powerful wide beam with OptiCube lens technology - Excellent side cut outs for enhanced side visibility - Large-capacity lithium-ion rechargeable battery - 3-level battery indicator (Blue: above 50% | Yellow: 30-50% | Red: Less than 30%) - Compact and robust alloy body - USB rechargeable (Micro USB cable included) - Mode memory function - 5 light modes: High, Middle, Low, Daytime HyperConstant, Flashing - Double click to turn on High mode - Secure FlexTight bracket for quick installation - Water resistant - Optional helmet mount, center fork bracket available Modes/Run time: - High mode: 800 lumens | 1.5hrs - Middle mode: 400 lumens | 2hrs - Low mode: 200 lumens | 4hrs - Daytime HyperConstant mode: 800/200 lumens | 4hrs - Flashing mode: 200 lumens | 30hrs Dimensions/Weight: - 32 x 102 x 33 mm - Weight: 136 grams (light unit and battery) Light source: - High intensity white LED X1 Optional Parts: - Center Fork Bracket (5342440) - Helmet mount (5341831N) Recharge time: - Approximately 3-7hrs (USB2.0 recharge) - About 300 recharge times (until rated capacity drops to 70%)

The Hecto Drive 500XL is a compact, durable cycling light with a machined aluminum body with built-in cooling fins and cutouts for side visibility. Its single LED design provides an impressive maximum output of 500 lumens and eight output modes, including a Daytime Flash mode. Offering up to 20 hours of total runtime, charging is simple with an integrated cable-free USB stick, and the light straps securely to a variety of handlebar shapes and sizes. Specs - Max Lumens: 500 - Weight: 84g - Max Runtime: 20 hours - Recharge Time: 2:30 hours

E-Cable For BOSCH - Length: 75cm/30inch - Compatible with MJ-90XS, ME series

E-Cable For SHIMANO - Length: 75cm/30inch - Compatible with MJ-90XS, ME series

- 1 super bright LED - Easy On/Off - Never worry waterproof design - Universal rubber bracket

NiteRider Lumina Max lights light up the night and are daylight visible with Cree LEDs and Max Boost mode. They're high-powered and feature a rugged design made with Dupont fiberglass-reinforced plastic body with integrated aluminum heatsinks. Max series lights feature NiteLink wireless connectivity with the Omega 300 taillight. - NiteLink Wireless Technology allows the rider to pair and simultaneously power on/off the headlight and Omega EVO 300 taillight wirelessly. (Taillight sold separately) - Multiple light modes including varying Steady and Safety Flashes - Handlebar mounting (Up to 35mm) with Quick Release Tab for easy light removal - CREE LEDs—the highest-performing LEDs on the market - Compatible with NiteLink Wireless Remote Switch (Sold separately) - Lumens: 2500 - Battery: Li-Ion - Recharge Type: USB

German StVZO optimized lens with wide light spread. Two high-output LEDs provide 11 lumens. IPX7 water resistant rating. Composite matrix fender mounting system. E-bike compatible (6v input, 0.6w / 12v input 1.2w) easily plugs into batteries from top makers including Bosch, Shimano and Yamaha. Stainless Allen key hardware and 130cm long power cable included. Our e-bike lights are powered by the motor of an e-bike and need to be manually installed. Proper installation may require some disassembly of the bike and motor (depending on make and model battery type) and additional wiring to connect the light to the motor. Please contact the e-bike or motor manufacturer for installation instructions. It is highly recommended to have a trained e-bike professional install your lights for you. - Two high-output LEDs provide 11 lumens - StVZO optimized lens with wide light spread - E-bike compatible 6 – 12V input, 1.25W - Composite matrix fender-mounting system - IPX7 water resistant - Stainless Allen key hardware included - 130 cm power cable included

The NiteRider Tail Light Strap Mount allows for quick installation and fitment on to standard seat posts. It features a quick release tab that allows you to remove just your tail light, leaving the strap mount installed on the seat post; ideal for when you leave your bike unattended or when it's time for a recharge. System Compatibility - Sentinel - Solas - Sabre - CherryBomb - TL 5.0 SL Not compatible with omega 300 and sentry aero 260 tail lights.

The 2'Fer-XL is the big brother of Blackburn's popular 2'Fer light. This light works hard, pulling double duty as either a 200 lumens front or a 40 lumens rear light, depending on your needs. The clever mount design lets you easily pop it onto your bike's handlebar or seat post, or use the clip to mount it on your backpack or belt. - Charging cable included, no tools required - Lithium Polymer battery - Waterproof to IP-67 standard - Optimized lenses - LED Fuel Gauge/Charge Indicator - Aluminum construction - Three hour recharge time - 78g / 0.17lb each Front: - 200 Lumens - Runtime: High 2hrs, Flashing 6hrs Rear: - 40 Lumens - Runtime: High 4hrs, Flashing 12hrs

ME 1000, designed specifically for e-bike riders, is connected and powered directly by the output of the e-bike motor (Shimano, Bosch, Broser, Yamaha). Requires cable dependent on the motor system (sold separately). - Anti-Glare Lens. - Daytime Running Light . - Ambient Light Sensor. - Lumen: 1000 - Waterproof: IPX 6 - Application: E-Bike; Road, Off-Road. - Aluminum alloy case.

Magicshine tool-free helmet mount MJ-6058, compatible with most bike lights with the o-ring type mount. Attach your Magicshine Bike Light to your helmet. Adding a helmet mounted light to your existing bar mounted bike lights gives an enhanced night time riding experience. By positioning an extra light higher up you get added perspective, enabling faster and more technical riding on the mountain trails. The slightly larger attachment gives you some discretion over the angle of beam from your light head, meaning you can use the light for many other activities not just night riding. A Velcro strap allows the helmet mount to be fitted and removed from your vented helmet within seconds.

Clip mount compatible with Magicshine SEEMEE 60, 100, 180 and 200 bike tail lights. Allowing the red tail light to be clipped onto backpacks, saddle bags, coats or belts.