Filter By:
- Bottom Brackets (111)
- Cassettes/Freewheels (69)
- Chainrings (139)
- Chains (55)
- Cranksets (116)
- Derailleurs (65)
- Groups (11)
- Shift/Brake Combinations (15)
- Show More Categories
- Shifters (54)
- Show Fewer Categories
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Drivetrain
Our Box Four tier is for those people who just want less fuss! You're fond of Prime 9, but know 8 is enough, and surely 11-42T is plenty of range for an 8-speed cassette. Our derailleur still has the Limited Slip clutch but now arrives with a more compact cage. The custom 8-speed chain is built for abuse, although it's sophisticated enough to have its own Wide/narrow chainring. Push through fewer gears with a no-nonsense shifter. This combo will transport you to 1 by territory for less than $200.
ONEUP YOUR CLIMBING PERFORMANCE AND CLEAN MORE CLIMBS WITH OUR OVAL CHAINRINGS.
Our Oval design has 3 main benefits; traction, traction and more traction. Forget any of the power gain claims that you've heard from the road side of the sport. For mountain, oval rings provide a more constant torque to the rear wheel thereby reducing spinouts and stalls on tough climbs.
- Get ultimate traction by smoothing out the torque you deliver to your rear tire
- 12% ovality (32T is equal to a 30T-34T range)
- 115° clocking from crank arm puts the major axis in your power stroke
- Narrow Wide tooth profile eliminates chain drop with the perfect chain mesh fit
- Saves over 30g versus stock ring (32T)
- Perfect chainline 49mm (corrected from stock 50.4mm) for a quieter drivetrain with improved chain wear and best drop performance.
- Includes shims to allow compatibility with your stock Shimano 1X or 2X hardware (no need to buy a new bolt pack)
- Aggressive crud chamfers for awesome mud shedding performance and extended ring life.
- Reinforced Wide tooth design provides maximum ring durability when run without a bash.
- Made from 6mm hard wearing 7075-T6 aluminum plate
SPEC
- Material: 7075-T6
- Chainline: 49mm
- Weight: 46g (30T), 56g (32T)
- Colour: Black
Compatible with:
- M8000 XT and M7000 SLX Cranks and 9,10, 11 and SRAM 12spd chains
- 11 speed Shimano XT M8000 1X and 2X armsets
- 11 speed Shimano SLX M7000 1X armsets
- 11 speed Shimano MT700 2X armsets
- 12 speed Shimano MT510 1X armsets
NOT Compatible with:
- 12 Speed Shimano/Hyperglide+ Chains
- 10 speed Shimano XT armsets
Colours: Black
Installation: Align the small bump (small hole on direct mount rings) on the inner edge of the ring with your crank arm
OneUp your complete drivetrain with our new Narrow Wide Chainrings.
- Narrow Wide tooth profile eliminates chain drop with the perfect chain mesh fit
- Perfect chainline with 2mm Shims included with 32T and 34T rings (30T rings have built in offset). For a quieter drivetrain with improved chain wear and best drop performance.
- Reuse your existing 8-10mm long ring hardware. No new bolt packs required, saves you $15.
- Aggressive crud chamfers for awesome mud shedding performance and extended ring life.
- Reinforced Wide tooth design provides maximum ring durability when run without a bash.
- Made from hard wearing 7075-T6 aluminum plate
- 30T rings have integrated shims and chainring bolt threads to allow the smallest ring size possible on a 104 BCD crank (loose shims are only included with the 32T-36T sizes).
*Shims - Included with 32T and 34T rings. For 2x crank conversions, shims between the crank and ring get you back to an ideal 49-50mm chainline. For 3x crank conversions, shims under the bolt heads allow reuse of your 3x hardware - No new bolt packs required!
SPEC
- Material: 7075-T6
- Weight: 40g (30T), 44g (32T), 54g (34T), 2g (4x shims)
- Compatible with: 9, 10, 11 and 12 Speed SRAM Chains and 104 BCD cranks (not compatible with 12 Speed Shimano/Hyperglide Chains)
- Colors: Black, Green
- Installation: Align the small bump (small hole on direct mount rings) on the inner edge of the ring with your crank arm
Our Oval design has 3 main benefits; traction, traction and more traction. Forget any of the power gain claims that you've heard from the road side of the sport. For mountain, oval rings provide a more constant torque to the rear wheel thereby reducing spinouts and stalls on tough climbs.
- 12% ovality offers greater traction 115 degree clocking maximizes power stroke
- 30 tooth is the only oval ring that fits all 104BCD rings using unique countersunk spacers and M5 Torx bolts
- Narrow-wide teeth prevent unwanted chain drop
- Reuse your existing 8-10mm long ring hardware. No new bolt packs required, saves you $15
- Aggressive crud chamfers for awesome mud shedding performance and extended ring life
- Reinforced Wide tooth design provides maximum ring durability when run without a bash
- Made from hard wearing 7075-T6 aluminum plate
- 32T rings have integrated shims and M8 chainring bolt threads
- 30T rings have integrated shims and M5 chainring bolt threads to allow the smallest ring size possible on a 104 - - BCD crank. Bolts and spacers included.
SPEC
- Material: 7075-T6
- Weight: 51g (30T), 49g (32T), 51g (34T)
- Compatible with: 9, 10, 11 and 12 Speed SRAM Chains and 104 BCD cranks (not compatible with 12 Speed Shimano/Hyperglide Chains)
- Colors: Black
- Installation: Align the small bump (small hole on direct mount rings) on the inner edge of the ring with your crank arm
- Narrow-wide teeth prevent unwanted chain drop
- Subtly slotted bolt holes allow for a perfect fit with both 94 and 96 BCD symmetrical crank arms
- Perfect 49mm chainline with 2mm shims included for a quieter drivetrain improved chainring wear and best no drop performance.
- Reuse your existing 8-10mm long ring hardware. No new bolt packs required.
- Aggressive crud chamfers for awesome mud shedding performance and extended ring life.
- Reinforced wide tooth design provides maximum ring durability when run without a bash guard.
- Made from hard wearing 7075-T6 aluminum plate.
*Shims - Included with rings. For 2x crank conversions; shims between the crank and ring get you back to an ideal 49-50mm chainline. For 3x crank conversions; shims under the bolt heads allow reuse of your 3x hardware.
SPEC
- Material: 7075-T6 Aluminum
- Weight: 43g (30T), 49g (32T), 58g (34T)
- Chainline: 49mm
Compatible with:
- 9, 10, 11 Speed SRAM & Shimano, and 12 Speed SRAM Chains
- All symmetrical 4 arm 94 mm BCD cranks (SRAM XO1, X1, GX), all symmetrical 4 arm 96 mm BCD cranks (Shimano compact triple M782, M672, M622, M612)
SRAM chainrings usually have the BCD laser etched on the back of the ring
If your Shimano 3x crank has a 30T middle ring this is the 1x ring you need. Shimano crank part numbers are usually laser etched on the pedal end of the crank on the back face.
NOT Compatible with:
- 12 Speed Shimano/Hyperglide+ Chains
- Shimano Deore M5100-1 Cranks
OneUp your SRAM 94mm or Shimano 96mm BCD crank with our tried and tested narrow wide profile.
- 12% ovality offers greater traction 115 degree clocking maximizes power stroke
- Narrow-wide teeth prevent unwanted chain drop
- Subtly slotted bolt holes allow for a perfect fit with both 94 and 96 BCD symmetrical crank arms
- Perfect 49mm chainline
- Reuse your existing 8-10mm long ring hardware. No new bolt packs required.
- Aggressive crud chamfers for awesome mud shedding performance and extended ring life.
- Reinforced wide tooth design provides maximum ring durability when run without a bash guard.
- Made from hard wearing 7075-T6 aluminum plate.
*Shims - Included with rings. For 2x crank conversions; shims between the crank and ring get you back to an ideal 49-50mm chainline. For 3x crank conversions; shims under the bolt heads allow reuse of your 3x hardware.
SPEC
- Material: 7075-T6 Aluminum
- Weight: 42g (30T), 50g (32T)
- Chainline: 49mm
Compatible with:
- 9, 10, 11 Speed SRAM & Shimano, and 12 Speed SRAM Chains
- All symmetrical 4 arm 94 mm BCD cranks (SRAM XO1, X1, GX), all symmetrical 4 arm 96 mm BCD cranks (Shimano compact triple M782, M672, M622, M612)
SRAM chainrings usually have the BCD laser etched on the back of the ring. If your Shimano 3x crank has a 30T middle ring this is the 1x ring you need. Shimano crank part numbers are usually laser etched on the pedal end of the crank on the back face.
NOT Compatible with:
- 12 Speed Shimano/Hyperglide+ Chains
- Shimano Deore M5100-1 Cranks
Colors: Black
Installation: Align the small bump (small hole on direct mount rings) on the inner edge of the ring with your crank arm
$4.99
- Stock steel chainring bolts found on low/mid-range Race Face cranks
- For double cranksets
$6.99
Race Face 12mm crank bolt/puller for Respond, Chester, and Ride DH cranksets.
$6.99
Race Face 15mm crank bolt/puller for 2008 and newer Evolve and Ride cranksets.
$7.99 - $8.99
Race Face CINCH Crank Puller
• Puller cap for Cinch model Race Face cranks only, including Next SL, SixC and Turbine
• Puller cap utilizes 16mm hex key
• 26mm thread
$9.00
M8 Capless Crank Arm Bolt Kit
- For square-taper & Powerspline
$9.95
Assorted width bottom bracket spindle spacers for fine-tuning crank arm offset.
Product Specifications
- Compatibility: 19mm or 22mm Spindles
- Includes: 2 x 0.6mm, 2 x 1.5mm, 2 x 3mm
- Weight: 0.6 oz
$9.95
Sprocket adapter hat washer that adapts standard 23.8mm / 24mm / 15/16" sprockets to 19mm or 22mm spindles.
$9.99 - $14.99
- Chromoly cogs to fit any HG-splined cassette rear hubs
$9.99
- 7075-T6 aluminum direct mount spider or lockring to fit Race Face Cinch system splined cranks
- RF-3296 spider is required for running 2-ring setups with Boost (Race Face 1x Direct Mount rings work fine with Boost)
- Mounts using a common Park BBT-22 tool
$10.99
Race Face crank bolt/puller for 2008 and newer Next SL cranks and 2012 and newer Atlas cranks.
$12.99
- Economical replacement chain for single speed.
- Perfect for coaster style bikes or BMX.
- Master link included.
$12.99 - $14.99
Trail riding can be tough on your gear. The ends of your alloy cranks can take a lot of abuse as the trail rushes underneath you and your bike. Protect your cranks from any damage with Race Face crank boots - now made in a smaller version to fit most alloy MTB cranks. Made from a durable Race Face proprietary plastic blend, leave no doubt and go with the originator in crank end protection. Wrap it up and protect the tips.
Compatible with:
- Race Face
- Turbine Cinch
- Atlas Cinch
- Atlas (24mm Spindle)
- Turbine (24mm Spindle)
- Aeffect Cinch (175mm length ONLY)
- Most other popular alloy MTB cranks (except some alloy DH cranksets)
$12.99
Trail riding can be tough on your gear. The ends of your carbon cranks can take a lot of abuse as the trail rushes underneath you and your bike. Protect your cranks from any damage with Race Face crank boots. Made from a durable Race Face proprietary plastic blend, leave no doubt and go with the originator in crank end protection. Wrap it up and protect the tips!
Compatible with:
- Race Face
- Next SL Cinch (G3)
- Sixc Cinch
- Chester
- Respond
- Next/Next SL (24mm Spindle)
- Sixc (24mm Spindle)
- Most other popular carbon MTB cranks and assorted alloy DH cranks
$12.99
Trail riding can be tough on your gear. The ends of your Next SL G4 cranks can take a lot of abuse as the trail rushes underneath you and your bike. Protect your cranks from any damage with Race Face crank boots. Made from a durable Race Face proprietary plastic blend, leave no doubt and go with the originator in crank end protection. Wrap it up and protect the tips!
$13.99
Replacement crank bolt and puller cap set for Race Face Cinch cranksets.
$14.99 - $21.99
The KMC S1 is a single-speed chain suitable for use with internally geared hubs, or any single speed drivetrain.
- High pin power with reinforced durability
- Offers a quieter riding experience
- Anti-drop design
- Inner plate chamfering helps to provide fast and smooth shifting
- Internal gear hub system compatible
- Links (links): 112
- Color: Silver
- Width: 9.3mm
- Drivetrain Speeds: Single Speed 1/2 x 1/8-inch
- Half Link Chain: No
$14.99
Race Face aluminum chainring bolts for inner chainrings. Includes four 12.5mm bolts.
$14.99
Race Face Cinch bottom bracket spacer kit of OSBB bottom brackets.
$14.99
Race Face aluminum Torx chainring bolt/nut set for double and triple chainrings. Includes four bolt sets.
$14.99
SRAM's 3.0 Twist Shifters are simple to use and offer solid shifting and reliable construction. Using SRAM's 1:1 actuation ratio technology, the 3.0s are easy to set up and easy to adjust. Plus, with a simple twist of the wrist, you can shift all of gears at once. These shifters are indexed to shift three front chainrings, and feature micro-adjustments to keep derailleur alignment perfect.
$14.99 - $19.99
SRAM's MRX Comp Twist Shifters are simple to use and offer solid shifting and reliable construction. They shift a 2:1 Shimano rear derailleur.
Page 1 of 22
Next page