Maintenance/Repair

Brooks' Proofide Saddle Dressing shortens the break-in period of a new saddle. It's specially formulated from natural ingredients to preserve and condition the leather, keeping it supple and shower-proof for the life of the saddle.

- Swing-Bull Storage Rack - Foldable for out of way storage. - Hook angle adjustable to fit different style of frames.

Muc-Off's eBike All-Weather Chain Lube is a high-performance synthetic chain lube specifically designed for the hi-torque loads applied to an eBike chain. Our unique water-repellent, non-fling formula penetrates deep into the chain link, to create a durable protective coating which guards against corrosion and metal-to-metal wear. A unique blend of extreme pressure additives ensures the lube can stand up to even the most powerful e-bike drivetrains. Our formula will provide lubrication for long distance, on- & off-road riding in all conditions under high-torque loads. Unrivalled lube intervals will give you maximum protection over long distances. - Specifically formulated for eBike chains - For long distance, all-weather riding - High-performance, synthetic formula for maximum protection

With the disc extractor you can remove the aluminum disc on the side of your NEO Smart trainer in order to check the inside for residue and clean if necessary. This small tool is specially developed to open your NEO trainer yourself while staying within the terms of your warranty. The NEO disc extractor comes with three screws to fasten to your NEO. Use of this tool requires a 4mm Allen wrench, 5mm Allen wrench, and 24mm socket wrench.

With the Spider Prof repair stand you can easily perform the toughest repairs or lighter work such as adjusting and cleaning. - Anodized aluminum tubes are lightweight and resistant to detergents - Triangular profile means dirt is less likely to adhere to the surface - The integrated tool surface is height adjustable and can rotate 360-degrees - Compact when folded and easy to carry - Weight: 14 lbs - Maximum load: 44 lbs

The Spider Team repair stand is developed in collaboration with pro team mechanics who work with it intensively on a daily basis. Thanks to their tips, you too can adjust, assemble, and repair in an efficient manner. The Spider Team is also suitable for different shaped bottom brackets, such as time-trial bikes, bicycles with sensors for power measurement and bicycles with electronic gearing (Shimano Di2 or Campagnolo EPS). - Extra parts included for a variety of forks - Due to its triangular profiles dirt is less likely to adhere to the surface - Anodized tubes are lightweight and resistant to detergents - Compact and easy to carry when folded - The integrated tool tray can tilt and rotate 360-degrees - Weight: 9 lbs - Maximum load: 33 lbs - Not compatible with Lefty forks

Change a flat tire in no time with the simple yet effective combination of two tire levers and one tire setter. Made of glass-filled nylon, these tire levers are strong and flexible.

- Anti-Loosening, Anti-Corrosion thread prep with PTFE - Two colors offer coating for different spoke lengths

Pump bracket for Control Go High Pressure Pump (610000181)

Compatible with our Professional Chain Tool and the new Master Chain Tool

Pump bracket for Control Go High Volume Pump (610000182) and Control Go Hybrid High Volume Pump (610000183)

- Quality alloy construction makes valve core removal and installation a breeze. - Designed for a lifetime of use to keep you rolling for years to come.

Topeak Pump replacement parts and accessories. Includes all parts needed to rebuild TwinHead pumps.

Everyone needs tire levers. Everyone needs good tire levers. Ours are great. They come as a set of two, shaped to interlock with each other for storage. They're made of glass fiber-reinforced plastic so they're super strong and durable. The broad tip makes it safer for use on carbon wheels, and the spoke hook makes it easy to use multiple levers for those really tight tires.

The ideal trail-side repair kit. - Contains 6 patches, 1 metal buffer, 2 tire levers and 1 tube of rubber cement

The SRAM Piston Massage spacer is specifically designed for aiding in brake setup and feel. The purpose-built tool replaces the need to stack two rotors when advancing caliper pistons all the way out during a piston massage procedure. Features - Unique design fits all SRAM brake calipers apart from Monoblock calipers - It improves lever throw, giving consistent and reliable bite point - For instructions, refer to the SRAM Mineral Oil MTB Disc Brake Bleed Manual

Tools for repair and maintenance of RockShox Reverb suspension seatposts. - Specific to RockShox Reverb post

Refill pack for the Park Tool TPT-1 Tubeless Plug Tire Tool and other similar tools. These vulcanized rubber plugs are used to temporarily repair punctures in tubeless bicycle tire systems. Set of 5. NOTE: Intended for tubeless bicycle tires using sealant only. Not compatible with inner tube systems.

Park Tool's Replacement Chain Tool Pin (2-Pack) fits Park Tool's CT-1, CT-2, CT-3, CT-3.2, CT-5, and CT-7 Chain Tools. • Made from hardened alloy tool steel • Uses 7mm or 9/32" 12 pt box end/socket • Sold singly or in pairs

Park's Vulcanizing Patch Kit includes 4 round patches for small holes and 2 oval patches for wider cuts; a tube of self-vulcanizing glue that bonds the patches to your tube super securely; and sandpaper for preparing the punctured area for gluing. The kit comes in a small plastic box to fit in your seat bag or pack.

Replacement parts for JoeBlow Pro and JoeBlow Booster.

• Updated with a new material and new design • Features a wide flat tip for easy entry and fast tire removal, ergonomic shape and a handy spoke hook when multiple levers are needed • Perfect for tight beads and tubeless tires • Sold in sets of two.

Topeak's Shuttle Levers will remove even the most stubborn downhill tires. These levers are extra long for leverage and are made of engineering-grade plastic that is strong, rigid and durable.

The Super Patch Kit is comprised of a small plastic case, a piece of sandpaper for roughing up the tube and 6 peel-and-stick patches so no gluing is required. The patches stick fast thanks to 3M technology and they're thin and flexy to stretch with the tube. There's no easier way to patch a tube.

- For unscrewing and tightening of front chain ring nuts - The dimension of the hexagonal key opening is SW10 - Material: premium flex plus carbon steel

- High-quality plastic - Ergonomic design - Set of 3

RockShox's Schrader Valve Removal Tool is an essential tool for working on suspension components. This shop quality tool makes removing Schrader valve cores easy with its long, comfortable handle.

Tools for repairing and maintaining SRAM Level brakes.

This item contains 10 replacement plugs for the Blackburn Plugger Tubeless tool (sold separately), a one-shot tire plugging system for tubeless tires. It deploys in seconds to give a permanent fix for your flat.

- bearing tool for Vault, V18 or V14 models