Miscellaneous

This is an FSA Self Extracting Crank Bolt for Hollow Carbon MegaExo Light Cranks - Designed to fit hollow carbon FSA cranks only - Includes M17 bolt, M27 self-extracting cap, and washers

A BETTER REMOTE FOR ANY CABLE OPERATED DROPPER An Aluminum remote with an oversized bearing and a super smooth action. The unique lever position allows you to keep a stronger grip on the bars while actuating your post. Don't think twice about dropping your post, even when charging into technical sections. The OneUp lever mimics your R/H shifter’s inboard upshift paddle position instead of the usual downshift paddle position of most remotes. This position requires considerably less thumb movement to reach the lever. NO BLEEDING The cable setup is quick and easy. The cable clamps at the lever making shortening the housing length for clean routing a breeze. Unlike a hydraulically actuated dropper, there is no temperature sensitivity and If your remote gets damaged you can still lower or extend your post by removing it from your frame and pushing on the actuator by hand. - Kit includes cable and housing - Compatible with all cable actuated dropper posts.

Replacement dropper post remote body. - Does not contain cable, housing, or clamp bracket

Set of six oversized pins. All dropper posts require key way clearance. With so many different frames, clamps and ride heights it's not possible to ship play-free without running the risk of binding. The kit is meant to remove additional play that might develop over time or, for the more mechanically inclined, to tune the play out for a specific bike. Start with the 3 pins marked with 2 lines. If play still exists move to the 3 pins marked with 4 lines.

Get the most out of a small investment! These replacement jockey wheels use ceramic ball bearings and are made of wear-resistant plastic with a very long service life. This produces a high-efficiency jockey wheel that runs very smoothly. Suitable for road and mountain bikes (Shimano & Campagnolo).

Reducing friction was the main focus in the development of this product. Teflon is a smoother material than plastic, and adding it to the jockey wheel reduces the friction between the wheel and the bike chain. The ball bearings are made of Si3N4 grade ceramics, known for their low friction, and lubricated with grease to reduce maintenance requirements. In addition, a low friction seal is used. Suitable for road and mountain bikes (SRAM).

Reducing friction was the main focus in the development of this product. Teflon is a smoother material than plastic, and adding it to the jockey wheel reduces the friction between the wheel and the bike chain. The ball bearings are made of Si3N4 grade ceramics, known for their low friction, and lubricated with grease to reduce maintenance requirements. In addition, a low friction seal is used. Suitable for road and mountain bikes (Shimano & Campagnolo).

These jockey wheels use durable stainless steel ball bearings to improve drivetrain performance. They are ideal for cycling in the rain, or for demanding conditions such as mountain biking or cyclocross. They are lubricated with grease and maintenance-free.

These jockey wheels use durable stainless steel ball bearings to improve drivetrain performance. They are ideal for cycling in the rain, or for demanding conditions such as mountain biking or cyclocross. They are lubricated with grease and maintenance-free.

These replacement jockey wheels include standard ball bearings and are durable, run smoothly, and are maintenance-free. Suitable for SRAM road and mountain bike derailleurs.

Jagwire's M7 Adjusting Barrel is a 7 x 1.0mm-threaded replacement cable-adjusting barrel. It's the right part for many older-style mountain bike brake levers. It comes in two models and is made of durable metal with a lockring for locking your adjustments. You get a pack of 10.

Looking to get a little extra distance so that your derailleur clears your 40 or 42 tooth cog? Look no further. - M4 x 24mm screw for that extra little push

Jagwire's EZ Handle Single End Straddle Wire is a replacement straddle wire (also called a crossover or transverse cable) for cantilever brakes.

Jagwire's Sport Slick Galvanized Shift Cable is a fine shift cable made of galvanized steel for optimum shifting performance and durability.

Internal components for servicing the Reverb and Reverb Stealth mechanism.

BB30 Spacer - 15.46mm

Parts for repair and maintenance of DT Swiss hubs. - DT Swiss 240s Shim Ring

Parts for repair and maintenance of DT Swiss hubs. - DT Swiss Shim Ring: for Star Ratchet Hubs with 26mm OD Driveside Bearings

Includes: 1 x Overdrive Aero spacer that fits directly below the Contact Aerolight SL series of stems

- Dust-proof and waterproof rubber seal cover - Protect the power source connection on the frame when the e-bike is parked outside or you carry it without the EnergyPak

- Dust-proof and waterproof rubber seal cover - Protect the power source connection on the frame when the e-bike is parked outside or you carry it without the EnergyPak

- Dust-proof and waterproof rubber seal cover. - Protect the power source connection on the frame when the e-bike is parked outside or when you carry it without the EnergyPak.

Basics brake cables provide value on a budget. - Double ended for compatibility with SRAM/Shimano road and mountain brakes - Pre-stretched - Cable Head: Shimano/SRAM Road, Shimano/SRAM Mountain - Color: Silver - Diameter: 1.6mm - Length: 2795mm

Sport level brake cables come in a variety of cable end setups to fit most bikes at a quality level well above normal OEM cables. - Slick cables are die-extruded for smooth operation - Pre-stretched - SRAM/Shimano mountain compatible cable end - Stainless steel construction resists corrosion - Single end cable features weld-cut for easy installation

Jagwire's Road Brake Inner Wire is a high-quality brake cable made of stainless steel for excellent braking performance, corrosion resistance and durability. It comes in Campagnolo and SRAM/Shimano models and lengths to fit single and tandem bicycles.

KMC 3/16" Master Link Chain Links - For 3/16" chain, extra wide - Extra-wide, for non-derailleur bikes: BMX, cruisers, etc - Perfectly fits on KMC 415H & 415H-NP chains

Use to create your desired chain length in single-speed applications. Only one half link is needed. - Non-reusable - Width: 9.4 mm - Drivetrain Speeds: 1 - Color: Black - Chain Compatibility: Shimano , SRAM , Campagnolo , Connex , KMC

- Half-link connector allows you to add or subtract half of one link (1/2 inch) from the chain in order to optimize chain tension - Uses standard chain pin connector and tool

- Allows the use of a 7 speed shimano cassette on an 8 or 9 speed shimano cassette body

Parts for repair and maintenance of DT Swiss hubs. - DT Swiss Driver Spring - Ratchet EXP