Skip to main content

Filter By:

Mountain

$6,949.99 - $7,299.99 $7,299.99 - $8,549.99 Up to 19% Off
The Trail Bikes that Love to Play The Santa Cruz 5010 has always been more capable than many expected. But now with a high-traction 29-inch wheel up front, a maneuverable 27.5-incher out back, and even more refined suspension, their touch is even more deft on the trails. Featuring a 140mm fork and 130mm of VPP rear suspension travel, 5010 was made for sporty performance.
$7,799.99
If in doubt, take a Bronson out From flat out on the TR to fully flat over a table, if you wanna send it the Bronson delivers. The 150mm-travel bike can go deep on any landing and the VPP suspension design makes sure that there's no wasted energy when heading back up for another go. If you value style at speed or want to have fun feeling fast, then mixed wheels (29" up front, 27.5" out back) are the right choice. The larger front wheel provides more traction and stability that'll make you feel more confident squaring off the turns and diving for the inside lines. But a 27.5-inch tire in the rear means this bike still loves getting up on the back wheel and into the air.
$7,799.99
The Mountain Bike, Distilled The newest version of the Hightower remains our greatest hits of engineering—now further refined and bottled into our most all-terrain of bikes. Big on wheels, medium on travel, short on fuss, this is the do-it-all model that does it over and over again thanks to a versatile balance of geo, spec and durability. If you're not looking for extremes, just something extremely good, the Hightower is your elevator. Engineering Details: - OUR ENGINEERS’ GREATEST HITS Not all frames are created equal. Hightower represents Santa Cruz’s greatest hits, showcasing our design, engineering, and performance prowess. - LOWER LINK ASSEMBLY The highly sculpted and optimized Lower Link (A) houses a geometry-adjusting Flip Chip (B) and beefy Pivot Axles (C) to virtually eliminate lateral flex. - UPPER LINK ASSEMBLY We only use the highest quality Enduro MAX or TPX sealed, radial bearings (A) and premium fasteners (B) for our linkage assemblies. They’re easy to properly torque and maintain, plus we offer free replacement bearings for life. - ONE-PIECE SWINGARM VPP suspension utilizes a one-piece swingarm that eliminates the need for pivots on the stays, creating a stout, bulletproof rear end for accurate tracking and superior performance. - C AND CC CARBON Santa Cruz offers two grades of carbon—top-end CC Carbon and value-minded C Carbon. Though they have the same stiffness and performance, CC is lighter and comes paired with a more premium suspension. - CARBON MASTERY The Sag Window (A), Glovebox (B), and internal cable tunnels (not shown) demonstrate Santa Cruz’s expertise in combining practical function with carbon design and manufacturing artistry. - THE SUM OF THE PARTS In isolation, all these things are great—together with fanatical suspension tuning, a premium build spec, and meticulous attention to detail, they’re transcendent.
$7,799.99
All the Travel and MX Wheels A downhill bike that goes everywhere Seriously. The Megatower's big wheels, long travel, and tough carbon fiber chassis delivers the high-speed security traits of a downhill bike. Yet the relatively-steep seat tube angle and size-specific geo maintain the Mega's mega pedaling ability-elevating its reputation as the perfect choice for big gravity rides and DH park laps.
$7,999.99
A downhill bike that goes everywhere Seriously. The Megatower's big wheels, long travel, and tough carbon fiber chassis delivers the high-speed security traits of a downhill bike. Yet the relatively-steep seat tube angle and size-specific geo maintain the Mega's mega pedaling ability-elevating its reputation as the perfect choice for big gravity rides and DH park laps. SRAM Eagle Transmission - stronger, better shifting, wirelessly The next generation SRAM Eagle Transmission specced on our CC-carbon models is a radically robust, fully integrated and interdependent wireless transmission. Built around the universal constant of the wheel axle itself, the Full Mount hangerless attachment creates a far stronger connection to the frame and the super strong derailleur provides unprecedented strength. Shifting under load is made possible due to a combination of X-SYNC technology and cassette mapping, creating seamless shifts even during your hardest power output. The new AXS Pods are extremely ergonomic and highly customizable, so shifting gears is light and intuitive. It's simply the most advanced transmission and nearly as tough as the mountain itself.
$9,249.99
THE MOUNTAIN BIKE, DISTILLED The newest version of the Hightower remains our greatest hits of engineering - now further refined and bottled into our most all-terrain of bikes. Big on wheels, medium on travel, and short on fuss, this is the do-it-all model that does it over and over again thanks to a versatile balance of geo, spec, and durability. If you’re not looking for extremes, just something extremely good, the Hightower is your elevator. Engineering Details: - OUR ENGINEERS’ GREATEST HITS Not all frames are created equal. Hightower represents Santa Cruz’s greatest hits, showcasing our design, engineering, and performance prowess. - LOWER LINK ASSEMBLY The highly sculpted and optimized Lower Link (A) houses a geometry-adjusting Flip Chip (B) and beefy Pivot Axles (C) to virtually eliminate lateral flex. - UPPER LINK ASSEMBLY We only use the highest quality Enduro MAX or TPX sealed, radial bearings (A) and premium fasteners (B) for our linkage assemblies. They’re easy to properly torque and maintain, plus we offer free replacement bearings for life. - ONE-PIECE SWINGARM VPP suspension utilizes a one-piece swingarm that eliminates the need for pivots on the stays, creating a stout, bulletproof rear end for accurate tracking and superior performance. - C AND CC CARBON Santa Cruz offers two grades of carbon—top-end CC Carbon and value-minded C Carbon. Though they have the same stiffness and performance, CC is lighter and comes paired with a more premium suspension. - CARBON MASTERY The Sag Window (A), Glovebox (B), and internal cable tunnels (not shown) demonstrate Santa Cruz’s expertise in combining practical function with carbon design and manufacturing artistry. - THE SUM OF THE PARTS In isolation, all these things are great—together with fanatical suspension tuning, a premium build spec, and meticulous attention to detail, they’re transcendent.
$9,249.99
A downhill bike that goes everywhere. Seriously. The Megatower’s big wheels, long travel, and tough carbon fiber chassis deliver the high-speed security traits of a downhill bike. Yet the relatively steep seat tube angle and size-specific geo maintain the Mega’s mega pedaling ability—elevating its reputation as the perfect choice for big gravity rides and DH park laps. Design Details: - Glovebox Place everything you need for a ride beneath the reassuringly high-quality latch and panel in the downtube, including your driving gloves. The Glovebox also comes with a Tool Wallet and Tube Purse, two refined pouches for keeping your essentials close to hand. - Full carbon C and CC frame options While both versions of our carbon frames are made in our own factory, are just as strong and stiff as one another, and have a lifetime warranty, there are a couple of differences between the two. CC frames use the very best materials and production processes available, while our C frames add on a little more weight for a little less $. - Steeper seat tube angle The steep seat tube angle puts you in the right place to scale the steepest pitches to get to the wildest descents. Even better, it gets progressively steeper as the sizes get larger so everyone sits in the right spot. - 165mm of VPP™ travel A relatively low leverage ratio not only makes setup easier but delivers a more damped, controlled feel across the travel range. - Coil and water compatibility Even with a lower-link flip chip and the option to run large-body shocks, like a coil, you’re still able to fit a water bottle inside the front triangle. - Longer travel? 165mm of travel comes standard, but if you choose to run a shock with a longer, 65mm stroke, you can bump it up to 170mm. - Details matter The frame details are completed with a neat mud flap that protects the rear shock, a rubberized downtube protector that shrugs off strikes, and tidy cable routing within the frame and swingarm. - Proportional geo The Megatower's chainstay length is matched to the frame size so every rider, no matter their height, gets the same balanced geometry. - Full size range From size small to XXL, no one misses out on the Megatower.
$9,249.99
ALL THE TRAVEL AND MX WHEELS Load up the van, hit the road, climb a mountain, hammer it back down, huck the gap, throw the bike back in the van, drive to the bike park, and do laps on laps. Hell, you could even rock up to the startline of the world's wildest races. The Nomad’s forte is being ready and willing to go wherever, whenever. The only thing it needs is a rider willing to press send. Design Details: - 170mm travel All the travel anyone needs in a single-crown bike intended for the steepest and deepest of trails. - Glovebox Place your ride essentials securely beneath a new high-quality latch and panel in the Nomad's downtube. The Glovebox comes with a fitted Tool Wallet and Tube Purse to keep your tools close to hand. - Proportional geometry Chainstay length and seat angle are matched to the frame size (STA steepens and rear center grows as frame size increases) so that every rider, no matter what height, gets the same balance of geometry and handling characteristics. - MX wheels The mixed wheel configuration of a 29-inch wheel up front provides traction and stability, while the 27.5-inch rear wheel allows for quick back wheel steering and lifting. Mixing the best of both worlds. - Flip your chip In the Low position, the shock rate becomes more progressive, particularly at the end of the stroke, and there’s some bottom-out resistance to be gained. In the High setting, the bike rides a little higher in its travel and supplies the rider with more mid-stroke support. - Frame stiffness tuned by size Bigger riders mean bigger stresses on bigger frames. So we tailor stiffness for every size to make sure everyone gets the same ride quality. - Details matter The details are completed by a neat mud flap to protect the rear shock plus tidy cable routing within the frame and swingarm, and rubberized DT protectors to shrug off strikes. - VPP™ VPP™ suspension can be optimized to strike a balance between pedaling efficiency and all-out bump-chomping prowess. The Nomad is exceptional at absorbing the biggest hits so its rider can charge harder, with more confidence, in the very worst terrain. But because it's still pedal efficient, getting up to the best, highest trails isn't a chore like some other bikes. - All the travel If you're stomping gaps and stamping passports you're no stranger to travel. 170mm of 38mm diameter fork and 170mm of VPP™ rear suspension, compatible with both coil and air shocks. - Sensitivity and constant traction On the Nomad, lowering the anti-squat reduced pedal kickback on big square-edge hits at speed, all while improving the overall sensitivity of the suspension to maintain traction at all speeds. Up and downhill. - Flat-out bump control and tracking By reducing the starting leverage of the latest Nomad, we were able to improve body-weight-influenced geometry stability throughout the travel. Reducing progression allowed the suspension to have consistently better tracking qualities throughout the stroke. - Built to last Short, stout counter-rotating links connect the front and rear triangles to create an extremely robust chassis that reduces lateral flex. Simple expanding collet axles hold things together, pivots run on large diameter axles and bearings (which we offer free lifetime replacement for) and the lower link includes a grease port for quick, easy maintenance.
Page 1 of 1