Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Accessories

Chrome-plated - Loud and clear sound
Two really smart, compact USB lights that act as either a front or rear... its a 2Fer. With the push of a button, the 2’Fer can switch between a white 60 lumen front light and a red 20 lumen rear light. Holding the button for 2 seconds turns the light on and off, and pushing the button once changes modes between white solid, red solid, white flashing and red flashing. The light also remembers which mode you were last using and turns on in that mode. - Micro USB charging connection - LED fuel gauge/charge indicator - 180 degree visibility - No tools needed - 1 LiPo battery - 18 Grams
The 2'Fer-XL is the big brother of Blackburn's popular 2'Fer light. This light works hard, pulling double duty as either a 200 lumens front or a 40 lumens rear light, depending on your needs. The clever mount design lets you easily pop it onto your bike's handlebar or seat post, or use the clip to mount it on your backpack or belt. Features: - Meets ANSI FL-1 standard - Front or rear capable - Excellent side visibility - Charging cable included, no tools required - Lithium Polymer battery - Waterproof to IP-67 standard - Optimized Lenses - LED Fuel Gauge/Charge Indicator - Aluminum construction - 3 hour recharge time - 78g / 0.17lb each Front: - 200 Lumens - Runtime: High 2hrs, Flashing 6hrs Rear: - 40 Lumens - Runtime: High 4hrs, Flashing 12hrs
The 2'Fer-XL is the big brother of Blackburn's popular 2'Fer light. This light works hard, pulling double duty as either a 200 lumens front or a 40 lumens rear light, depending on your needs. The clever mount design lets you easily pop it onto your bike's handlebar or seat post, or use the clip to mount it on your backpack or belt. - Charging cable included, no tools required - Lithium Polymer battery - Waterproof to IP-67 standard - Optimized lenses - LED Fuel Gauge/Charge Indicator - Aluminum construction - Three hour recharge time - 78g / 0.17lb each Front: - 200 Lumens - Runtime: High 2hrs, Flashing 6hrs Rear: - 40 Lumens - Runtime: High 4hrs, Flashing 12hrs
The Bosch PowerPack 500 is the same size as the PowerPack 400 and only slightly heavier, but offers a longer range. When using the Bosch Standard Charger, this lithium-ion battery requires about two hours to charge to 50% and approximately 4.5 hours to charge fully. Once fully charged and together with the Performance Line Cruise, the eBike can ride up to 56 miles. The PowerPack 500 comes as a frame or rack model for all eBike product lines.
- The Brooks Norfolk Front Panniers are the perfect complement to the Suffolk Rear Panniers (sold separately). - Made from "cotton-like", high-quality 900D x 1200D polyester with a waterproof polyurethane coating, a bluesign standard textile - Panniers attach easily with the QL2 attachment system from Ortleib, which integrate a handle for carrying. - Important Note: Pannier Sold Individually. In order to purchase a set of panniers, please place 2 in the shopping basket. Panniers can be mounted on the left or right side. - Width: 260mm - Height: 330-480mm - Depth: 140mm - Volume: 10-13L
Brooks' Proofide Saddle Dressing shortens the break-in period of a new saddle. It's specially formulated from natural ingredients to preserve and condition the leather, keeping it supple and shower-proof for the life of the saddle.
The Strand Shoulder Bag is a messenger-style bag featuring the Brooks patented cycling belt for stability whilst riding. Made from durable, waterproof materials and robust hardware, the Strand features a padded laptop compartment, aquaguard zips, and a unique stretchable compartment on the front. -Waterproof PU Coated Nylon 66 & Cordura -YKK Aquaguard Zips -Padded Compartments -Clever Interior Details -High Grade Aluminium Hardware -100% Recycled Lining -Reflective Details VOLUME : 15L
The new standard for style and function in travel luggage. Made from waterproof, bluesign material, these roll-top panniers feature a convenient large outer pocket and additional four-way stretch side pockets to secure water bottles, jackets, or other oft-needed items, ensuring that you will never have to pack out your bags during the ride. - Important Note: Pannier Sold Individually. Panniers can be mounted on the left or right side. - Width: 320mm - Height: 400-590mm - Depth: 160mm - Volume: 18-22L
Derived from superior materials including Trutaste Polypropylene with HydroGuard, and featuring double-wall insulation, the CamelBak Podium Chill Insulated Water Bottle is the perfect cold-storage water bottle for cycling adventures. Keeping your body properly hydrated and improving your on-road performance is simplified thanks to this revolutionary sports bottle. Cycling enthusiasts have for years trusted CamelBak to provide them superior bottles for water that are optimized for peak performance. And the Podium Chill bike water bottle continues to elevate CamelBak as the best of the best in the cycling world. This premium bicycle water bottle has been reengineered to securely fit in a variety of bicycle bottle cages. The water bottles are easy to squeeze, allowing you to take in more water with less effort. Our CamelBak reusable sports water bottles are engineered with a high flow, self-sealing cap, which maximizes flow rate while reducing spills and splashes. The Podium Chill is also 100% free of BPA, BPS, and BPF. This bottle also features Trutaste Polypropylene with HydroGuard materials so that you taste your water and nothing else, time after time. All parts are easy to separate, which makes cleaning a breeze. Our Got Your Bak Lifetime Guarantee covers all reservoirs, backpacks, bottles, and accessories from manufacturing defects in materials and workmanship for the lifetime of the product. The CamelBak Podium Bike Chill Insulated Squeeze Water Bottle is available in several colors, allowing you to pick one that matches your personality.
- Swing-Bull Storage Rack - Foldable for out of way storage. - Hook angle adjustable to fit different style of frames.
Muc-Off's eBike All-Weather Chain Lube is a high-performance synthetic chain lube specifically designed for the hi-torque loads applied to an eBike chain. Our unique water-repellent, non-fling formula penetrates deep into the chain link, to create a durable protective coating which guards against corrosion and metal-to-metal wear. A unique blend of extreme pressure additives ensures the lube can stand up to even the most powerful e-bike drivetrains. Our formula will provide lubrication for long distance, on- & off-road riding in all conditions under high-torque loads. Unrivalled lube intervals will give you maximum protection over long distances. - Specifically formulated for eBike chains - For long distance, all-weather riding - High-performance, synthetic formula for maximum protection
TAPPING INSTRUCTIONS Remove your old star-nut and tap the top of your steerer tube. This might sound daunting, but we've made it super easy to do on your bike, without even removing your fork. - Remove your bar and stem - Use the OneUp star-nut puller to remove your old star nut - Using the self aligning steerer tap kit, tap a thread into your steerer until the tap bottoms out.
Securely carry up to four bikes with Swagman's Quad 2+2 platform hitch rack. The Quad 2+2 fits most frame sizes, shapes, and styles and requires only minimal lifting to load bikes. - Fits 2” hitch receiver - Locking hitch pin and cable included - Adjustable hooks secure frame to rack - Tire ratchet straps firmly hold bikes and secure wheels - Transforms from 2-bike to 4-bike carrier in seconds - Carries up to 4 bikes - Includes two same-key lock cylinders to lock bike to bike rack - Fat tire trays sold separately - Max. load: 45 lbs. per bike
With this Tacx wireless ANT+ receiver for Android devices with a micro USB port, you can connect to devices that communicate via ANT+. For example a heart rate meter, speed and cadence sensor, sports watch, GPS device or bike computer. This enables you to keep track of your performance continually. It also allows you to link an ANT+ trainer to the Tacx Cycling app (tablet) or Tacx Training app (smartphone), or connect an older model Tacx trainer which only has ANT+ to your telephone, so you can train with the Tacx Training app and Tacx Cloud. The device you want to connect must have a micro USB port and Android 4.3 or higher. This ANT+ dongle is only compatible with devices that have USB On-The-Go.
Use these axle nuts to put a city or track bike in a Tacx trainer. The available axle nuts are M10x1 (T1415) and 3/8 Shimano Nexus (T1416). For use with Tacx classic trainers only
The BlackTrack replaces the Skyliner (front wheel support) and enables you to steer freely in the Tacx Trainer software 4, Advanced. The front wheel of the bike is placed on a turntable so that you can steer to the left and the right. This allows you to choose where to ride when you are training in the virtual worlds. The BlackTrack communicates wirelessly with the computer via ANT+. Rubber Caps on the bottom prevent sliding and reduce noise. This steering frame is foldable. lightweight, and easy to store. The BlackTrack is suitable for the Tacx Trainer software (Windows PC) and can communicate with ANT+ trainers and interactive Smart trainers: - T1980 Bushido (ANT+) - T2020 i-Genius - T2050 Tacx IRONMAN trainer - T2060 Tacx IRONMAN Smart - T2080 Genius Smart with Upgrade Smart - T2170 i-Vortex - T2180 Vortex Smart with Upgrade Smart - T2240 Flow Smart with Upgrade Smart - T2780 Bushido Smart with Upgrade Smart
The Booster is the most powerful basic trainer and can generate high resistance at low speeds. If you set the handlebar resistance lever to a high position you have to exert a lot of force while advancing slowly, just like when you tackle a steep climb. This makes the Booster highly suitable for power based workouts. Manual Resistance Control The Booster is controlled by a lever on your steer, allowing you to set the resistance as required. The higher the position, the more resistance. 1050W power, 10 positions. Silence Boost The Booster is the only basic trainer with a closed resistance unit, highly reducing noise. Intervals & Power Workouts The powerful magnetic brake of the Booster enables intense interval sessions and power based workouts. Realistic Pedal Stroke The Booster features an actual flywheel which generates a realistic road feel. Stable & Robust 675mmx650mm footprint Multifunctional Front Wheel Support The Skyliner is a front wheel support that raises the front wheel for a natural cycling position and increased stability. It also serves as a handle to carry the trainer. Click 'n Ride The bike is fixed in the trainer easily by two simple clicks. Unique Dual Material Roller The roll that places the resistance on your rear wheel is made from two materials: a hardened steel sleeve with a soft core of elsastogel. The steel sleeve prevents wear of the trainer, while the elastogel absorbs vibrations to reduce noise. Virtual Power Train with the Tacx Training app, Tacx Cycling app, Zwift or TrainerRoad on the basis of virtual power using the Tacx speed and cadence sensor! This transmits your speed and cadence wirelessly via ANT+ or Bluetooth Smart to your tablet or smartphone, so you can also use these popular training applications with a basic trainer. FEATURES Type of trainer: Basic trainer with magnetic brake Magnets: 2x8 Permanent ferrite magnets Transmission: Roller, 30 mm Electrical requirements: No mains voltage required Power indicator: None Connection indicator (ANT/BT): None Firmware upgradable: No Suitable bikes: Race, Tri & MTB , if necessary with axle skewer Suitable axles: Width of rear fork: Race 130 mm, MTB 135 mm. Adapters for other widths available Supplied with: Front wheel support , Quick release for road bikes and mountain bikes (5mm) SPECIFICATIONS Max. power: (40 km/h) 1050 Watt Max. incline: n.a. Simulation of descent: No Max. torque: 17 Nm Max. brake force: 50 N Flywheel: Actual of 1,6 kg Mass inertia: 9.18 kg (20.2 lbs) Calibration: n.a. Footprint: (lxw) 675 × 650 mm (26.6 × 25.6 in) Height: 410 mm (16.1 in) Dimensions when folded: 565 × 410 × 245 mm (22.2 × 16.1 × 9.65 in) Weight: 8.53 kg (18.8 lbs) Article number: T2500 DATA OUTPUT AND CONTROL Wireless communication: None Control by: Handlebar resistance lever with 10 positions
The Bushido is an interactive Smart trainer with wireless motor brake. It’s wireless motor brake, with a maximum resistance of 1400 Watts, ensures smooth pedaling, even during steep climbs. The Bushido powers itself and is therefore completely wireless, it doesn’t even need a power cable. Instead of training with a handlebar computer you can connect the trainer to the Tacx apps quickly and easily. Just like the other Smart trainers, the Bushido uses ANT+ and Bluetooth® Smart to communicate with the connected device for convenient training sessions. Performance data can be viewed on several devices simultaneously, including your smartphone, bike computer and sports watch. When the Bushido Smart isn’t connected to a smartphone, tablet or computer, it behaves as a fluid trainer. This means the trainer behaves progressively: when your speed increases, the resistance increases as well. So it is possible to use this trainer in a “stand-alone” status. Since the Bushido is not hooked up to the power net, you can use this trainer anytime and anywhere. Even when you don’t have your smartphone with you. Software Tacx apps & Third party apps. PC software via upgrade. Operation Automatic Resistance unit Wireless motor Realistic slope 15% 1 Descent simulation - Max brake power (10 sec.) 1400 Watt Sprint power (1 min.) 750 Watt Mass inertia 60 kg 2 Suitable for all bikes, if necessary with axle skewers or nuts Wheeldiameter 26"- 29" and 700c; 29" with trainer tyre
The Tacx trainer mat protects your floor and muffles the noise of your indoor training sessions. The bottom of the mat has a non-slip coating and the top has additional reinforcement to prevent damage when you get on and off your bike. - Easy to fold up - Lightweight - Measures 173cm x 74cm
The Galaxia is an advanced roller. The patented swing system allows it to absorb the forward and backward accelerations perfectly, ensuring that you do not ride off the rollers. The Galaxia can be retracted to 80 cm. Patented Swing System The Galaxia relies on a swing system that ensures the rollers can swing forward and backward. When you start to sprint, switch pace fast, or stand on the pedals, this system absorbs the sudden forward or backward movement so you do not derail. Conical Rollers The Tacx rollers are conical which ensures that your bike always remains in the middle of the roller while you are riding. This makes riding on the rollers easier and safer. Retractable The Tacx rollers are retractable to 80cm FEATURES Type of trainer: Roller Roller diameter: 100-110mm (3.93-4.33in) Suitable bikes: All bikes with a wheel diameter of 26 to 29 in SPECIFICATIONS Max. footprint (lxw): 1350×500mm(53×19.7 in) Height: 135 mm (5.31 in) Dimensions when folded: 800 × 500 × 135 mm (31.5 × 19.7 × 5.31 in) Weight: 8.2 kg (18.1 lbs) Article number: T1100
Don't miss out on any action! The Tacx GoPro bike mount can be placed on the handlebar or saddle to record everything that happens in front or behind you. Installing the bracket on your bike is very simple. After placing the mount on your bike, you can insert the camera into the holder easily and quickly and you are ready to record. - Easily switch between mounting options - Handlebar adapter can be used on road or mountain bikes - Saddle adapter works with 7mm and 9mm diameter saddle rails and is also compatible with the Tacx Mudguard - Compatible with GoPro HERO and HERO +, GoPro HERO 2, GoPro HERO 3 and 3+ and GoPro HERO 4 and 4+ models - Also suitable for any other camera with a base identical to that of GoPro cameras
Go ride outside! Whether you ride over cobblestones or in the woods, the mudguard keeps you splashing rain and mud. Its smart design makes it simple and easy to connect to your bike. - The shape offers optimal protection against splashing water and mud while made as light as possible - Thanks to the quick-release attachment, you can effortlessly click the mudguard into place under the saddle - Made from durable shockproof plastic - Attractive, slender design - Easy to clean - Compatible with 7mm or 9mm saddle rails
Meet The NEO 2 Smart, the pinnacle of indoor bike training. In addition to immersive features that truly make you feel like you’re riding outdoors, this new direct drive also features pedal stroke analysis and a number of other refinements that make it one of the most quiet, realistic and accurate bike trainers available. - Next-to-silent smart bike trainer with improved accuracy within 1%; measures power and cadence - Enables accurate pedal stroke analysis with left and right balance and power distribution - Dynamic inertia compensates for weight and other factors to ensure a realistic and smooth ride feel - Unique motor design allows for a maximum sprint resistance of 2,200 watts and simulates climbs up to a 25% incline - Only bike trainer with road feel, a feature that lets you experience the sensation of different road surfaces, such as cobblestone and gravel FEATURES Type of trainer: Interactive Smart direct drive with motor brake Magnets: 32 Neodymium magnets Transmission: None Electrical requirements: 110-240 Volt , Mains power optional Power indicator: Multicolor LED , Spot on floor Connection indicator: (ANT/BT) 2 LEDs Firmware upgradable: Yes Suitable cassettes: >2018: Shimano & SRAM: 8 - 11 speed; <2018: Various Shimano, SRAM & Campagnolo cassettes. >2018 Campagnolo body sold separately. Suitable axles: Road 130mm, MTB 135mm. Adapters for other widths available Supplied with: Front wheel support, Quick release for road bikes and QR-fork mountain bikes (5mm) SPECIFICATIONS Max. power: (40 km/h) 2200 Watt Max. incline: 25% Simulation of descent: Yes Max. torque: 85 Nm Max. brake force: 250 N Flywheel: Virtual Mass inertia: Variable to 125kg (275.6lbs) Calibration: No calibration required Footprint (lxw): 575 × 750 mm (22.6 × 29.5 in) Height: 550 mm (21.7 in) Dimensions when folded: 620 × 260 × 440 mm (24.4 × 10.2 × 17.3 in) Weight: 21.5 kg (47.3 lbs) Article number: T2800 DATA OUTPUT AND CONTROL Wireless communication: ANT+ FE-C, Bluetooth Smart open Control by: ANT+FE-C bike computers, Connect to computer via ANT+antenna, Smartphone, Stand alone, Tablet Output: Cadence, Power, Speed Read out on: Bike computer, Computer with ANT+ antenna, Smartphone, Sports watch, Tablet Error Tolerance: <1%
The NEO Track replaces the front wheel support of the NEO and enables you to steer freely in the Tacx Trainer software 4, Advanced (Windows PC). The front wheel of the bike is placed on a turntable so that you can steer to the left and the right. This allows you to decide yourself where to go to when training in virtual worlds. The NEO Track is only suitable for the NEO Smart in combination with the Upgrade Smart (Tacx Trainer software 4, Advanced and ANT+ antenna required). - Communicates wirelessly with the computer via ANT+ - Rubber caps on the bottom prevent sliding and reduce noise - Foldable, lightweight and easy to store
With the disc extractor you can remove the aluminum disc on the side of your NEO Smart trainer in order to check the inside for residue and clean if necessary. This small tool is specially developed to open your NEO trainer yourself while staying within the terms of your warranty. The NEO disc extractor comes with three screws to fasten to your NEO. Use of this tool requires a 4mm Allen wrench, 5mm Allen wrench, and 24mm socket wrench.
Go ride outside! Whether you ride over cobblestones or in the woods, the Tacx mudguard protects your back from dirt and water. It's made of strong yet lightweight material and can easily be attached and removed with a quick release system. - The shape offers optimal protection against splashing water and mud while being as light as possible - Thanks to the quick-release attachment, you can effortlessly click the mudguard into place under the saddle - Made from shockproof plastic that does not break, even on bumpy cobbled roads or dirt tracks - Attractive, slender design that's easy to clean
The Radar is a side load bottle cage with very good clamping, specifically designed to fit small bike frames. You insert and remove the bottle sideways from either side, depending on how you mount the cage. The body of the Radar is made from a strong glass fiber compound. Tacx increased its clamping force even further by giving it a round shape with extra ribs.
The Tacx trainer mat protects your floor and muffles the noise of your indoor training sessions. - Large and rollable trainer mat - Made from high quality, water-repellent 6mm thick foam - Protects your floor against scratches and sweat - Muffles noise and vibrations - 180 x 85 cm
Give your Galaxia or Anteres the best possible protection for storage or transport by using this sturdy trainer bag. The double inner layer with foam lining provides optimum protection, minimizing the risk of damage. This bag is ideal for riders who take their rollers to the track with them to warm up.
Page 1 of 110 Next page