Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Chainrings

ONEUP YOUR CLIMBING PERFORMANCE AND CLEAN MORE CLIMBS WITH OUR OVAL CHAINRINGS. Our Oval design has 3 main benefits; traction, traction and more traction. Forget any of the power gain claims that you've heard from the road side of the sport. For mountain, oval rings provide a more constant torque to the rear wheel thereby reducing spinouts and stalls on tough climbs. - Get ultimate traction by smoothing out the torque you deliver to your rear tire - 12% ovality (32T is equal to a 30T-34T range) - 115° clocking from crank arm puts the major axis in your power stroke - Narrow Wide tooth profile eliminates chain drop with the perfect chain mesh fit - Saves over 30g versus stock ring (32T) - Perfect chainline 49mm (corrected from stock 50.4mm) for a quieter drivetrain with improved chain wear and best drop performance. - Includes shims to allow compatibility with your stock Shimano 1X or 2X hardware (no need to buy a new bolt pack) - Aggressive crud chamfers for awesome mud shedding performance and extended ring life. - Reinforced Wide tooth design provides maximum ring durability when run without a bash. - Made from 6mm hard wearing 7075-T6 aluminum plate SPEC - Material: 7075-T6 - Chainline: 49mm - Weight: 46g (30T), 56g (32T) - Colour: Black Compatible with: - M8000 XT and M7000 SLX Cranks and 9,10, 11 and SRAM 12spd chains - 11 speed Shimano XT M8000 1X and 2X armsets - 11 speed Shimano SLX M7000 1X armsets - 11 speed Shimano MT700 2X armsets - 12 speed Shimano MT510 1X armsets NOT Compatible with: - 12 Speed Shimano/Hyperglide+ Chains - 10 speed Shimano XT armsets Colours: Black Installation: Align the small bump (small hole on direct mount rings) on the inner edge of the ring with your crank arm
OneUp your complete drivetrain with our new Narrow Wide Chainrings. - Narrow Wide tooth profile eliminates chain drop with the perfect chain mesh fit - Perfect chainline with 2mm Shims included with 32T and 34T rings (30T rings have built in offset). For a quieter drivetrain with improved chain wear and best drop performance. - Reuse your existing 8-10mm long ring hardware. No new bolt packs required, saves you $15. - Aggressive crud chamfers for awesome mud shedding performance and extended ring life. - Reinforced Wide tooth design provides maximum ring durability when run without a bash. - Made from hard wearing 7075-T6 aluminum plate - 30T rings have integrated shims and chainring bolt threads to allow the smallest ring size possible on a 104 BCD crank (loose shims are only included with the 32T-36T sizes). *Shims - Included with 32T and 34T rings. For 2x crank conversions, shims between the crank and ring get you back to an ideal 49-50mm chainline. For 3x crank conversions, shims under the bolt heads allow reuse of your 3x hardware - No new bolt packs required! SPEC - Material: 7075-T6 - Weight: 40g (30T), 44g (32T), 54g (34T), 2g (4x shims) - Compatible with: 9, 10, 11 and 12 Speed SRAM Chains and 104 BCD cranks (not compatible with 12 Speed Shimano/Hyperglide Chains) - Colors: Black, Green - Installation: Align the small bump (small hole on direct mount rings) on the inner edge of the ring with your crank arm
Our Oval design has 3 main benefits; traction, traction and more traction. Forget any of the power gain claims that you've heard from the road side of the sport. For mountain, oval rings provide a more constant torque to the rear wheel thereby reducing spinouts and stalls on tough climbs. - 12% ovality offers greater traction 115 degree clocking maximizes power stroke - 30 tooth is the only oval ring that fits all 104BCD rings using unique countersunk spacers and M5 Torx bolts - Narrow-wide teeth prevent unwanted chain drop - Reuse your existing 8-10mm long ring hardware. No new bolt packs required, saves you $15 - Aggressive crud chamfers for awesome mud shedding performance and extended ring life - Reinforced Wide tooth design provides maximum ring durability when run without a bash - Made from hard wearing 7075-T6 aluminum plate - 32T rings have integrated shims and M8 chainring bolt threads - 30T rings have integrated shims and M5 chainring bolt threads to allow the smallest ring size possible on a 104 - - BCD crank. Bolts and spacers included. SPEC - Material: 7075-T6 - Weight: 51g (30T), 49g (32T), 51g (34T) - Compatible with: 9, 10, 11 and 12 Speed SRAM Chains and 104 BCD cranks (not compatible with 12 Speed Shimano/Hyperglide Chains) - Colors: Black - Installation: Align the small bump (small hole on direct mount rings) on the inner edge of the ring with your crank arm
- Narrow-wide teeth prevent unwanted chain drop - Subtly slotted bolt holes allow for a perfect fit with both 94 and 96 BCD symmetrical crank arms - Perfect 49mm chainline with 2mm shims included for a quieter drivetrain improved chainring wear and best no drop performance. - Reuse your existing 8-10mm long ring hardware. No new bolt packs required. - Aggressive crud chamfers for awesome mud shedding performance and extended ring life. - Reinforced wide tooth design provides maximum ring durability when run without a bash guard. - Made from hard wearing 7075-T6 aluminum plate. *Shims - Included with rings. For 2x crank conversions; shims between the crank and ring get you back to an ideal 49-50mm chainline. For 3x crank conversions; shims under the bolt heads allow reuse of your 3x hardware. SPEC - Material: 7075-T6 Aluminum - Weight: 43g (30T), 49g (32T), 58g (34T) - Chainline: 49mm Compatible with: - 9, 10, 11 Speed SRAM & Shimano, and 12 Speed SRAM Chains - All symmetrical 4 arm 94 mm BCD cranks (SRAM XO1, X1, GX), all symmetrical 4 arm 96 mm BCD cranks (Shimano compact triple M782, M672, M622, M612) SRAM chainrings usually have the BCD laser etched on the back of the ring If your Shimano 3x crank has a 30T middle ring this is the 1x ring you need. Shimano crank part numbers are usually laser etched on the pedal end of the crank on the back face. NOT Compatible with: - 12 Speed Shimano/Hyperglide+ Chains - Shimano Deore M5100-1 Cranks
OneUp your SRAM 94mm or Shimano 96mm BCD crank with our tried and tested narrow wide profile. - 12% ovality offers greater traction 115 degree clocking maximizes power stroke - Narrow-wide teeth prevent unwanted chain drop - Subtly slotted bolt holes allow for a perfect fit with both 94 and 96 BCD symmetrical crank arms - Perfect 49mm chainline - Reuse your existing 8-10mm long ring hardware. No new bolt packs required. - Aggressive crud chamfers for awesome mud shedding performance and extended ring life. - Reinforced wide tooth design provides maximum ring durability when run without a bash guard. - Made from hard wearing 7075-T6 aluminum plate. *Shims - Included with rings. For 2x crank conversions; shims between the crank and ring get you back to an ideal 49-50mm chainline. For 3x crank conversions; shims under the bolt heads allow reuse of your 3x hardware. SPEC - Material: 7075-T6 Aluminum - Weight: 42g (30T), 50g (32T) - Chainline: 49mm Compatible with: - 9, 10, 11 Speed SRAM & Shimano, and 12 Speed SRAM Chains - All symmetrical 4 arm 94 mm BCD cranks (SRAM XO1, X1, GX), all symmetrical 4 arm 96 mm BCD cranks (Shimano compact triple M782, M672, M622, M612) SRAM chainrings usually have the BCD laser etched on the back of the ring. If your Shimano 3x crank has a 30T middle ring this is the 1x ring you need. Shimano crank part numbers are usually laser etched on the pedal end of the crank on the back face. NOT Compatible with: - 12 Speed Shimano/Hyperglide+ Chains - Shimano Deore M5100-1 Cranks Colors: Black Installation: Align the small bump (small hole on direct mount rings) on the inner edge of the ring with your crank arm
$14.99 - $34.99
Original equipment on SRAM and Truvativ cranks, these chainrings also work well with other drivetrains.
$19.99
- Shimano, 22T, 9 sp, BCD 64mm, 4-Bolt, Deore FC-M590, Inner Chainring, For 22/32/44, Steel, Black, Y1LD22000
$19.99
- Chainrings for SLX FC-M675 double cranks - Please refer to compatibility: 38T chainrings are available for 24T or 26T inner chainring and are not cross-compatible.
$19.99 - $24.99
Shimano SLX M660 10-Speed chainrings get worn out drivetrains back in like-new condition.
$19.99
Shimano SLX M7000 10-Speed chainrings get worn out drivetrains back in like-new condition.
$24.99 - $64.99
Shimano chainrings offer durability and confidence-inspiring performance, and go a long way towards getting a drivetrain back to optimum working condition. - Compatible with 4-bolt, 104/64 pattern crank arms
$29.99 - $79.99
- CNC machined 7075-T6 aluminum with modified shift gates and special profiles to allow flawless shifting with 9sp and 10sp drivetrains - Middle and outer chainrings have strategically-placed stainless steel pins to further enhance shifting - 5mm thick middle ring, 4mm thick outer ring - Anodized black with laser-etched graphics
$29.99
Live Long and Prosper Steel is real, so if you are pining for a 12 speed, direct mount chainring for your Cinch crankset that will stand up to years of kicking up dirt, cruising endless singletrack, smashing climbs, and everything in between, then look no further! Freedom Fighter Our Cinch interface makes this long-wearing steel direct mount chainring fast and easy to swap so you can customize your Shimano 12-speed drivetrain. Long-Hauler Stamped from real steel, this ring will keep going and going...and going. Plus, your 12-speed chain stays secure thanks to our awesome NW tooth profiling. - Compatible with Cinch Direct Mount Cranks - Steel - Direct Mount
$29.99
Narrow wide chainrings compatible with Race Face CINCH system cranks. Direct mounting allows an easy switch between rings. - Compatible with 9, 10, 11, and 12-speed - Narrow Wide tooth profiling ensures consistent chain retention - Lockring installed/removed with ISIS BB tool - Stiff 4mm plate thickness to transfer loads without flexing
$29.99 - $54.99
64BCD chainring for MTB cranksets
$29.99 - $34.99
The X-SYNC 2 Bosch Direct Mount Chainring is built with the needs of E-MTB riders in mind, and incorporates the same X-SYNC 2 Eagle chain management technology found in every SRAM 1x drivetrain. - Sharp, narrow tooth profile and rounded chamfer edges help manage a deflected chain - Mud-clearing recesses - An integral component of the SRAM 1x drivetrain - Speeds: 12 - Material: Steel
$29.99 - $144.99
- Drivetrain Speeds: 11 - Chainring BCD: 110 Shimano Asymmetric - Material: Aluminum
$29.99
- Shimano, 38T, 8 sp, BCD 104mm, 4-Bolt, FC-M361, Middle Chainring, For 28/38/48, Steel, Black, Y1KN98040
$29.99 - $194.99
- Shimano, GRX FC-RX810 2x11, Chainring, Teeth: 31, Speed: 11, BCD: 80, Bolts: 4, Inner, Aluminum, Black - Shimano, GRX FC-RX810 2x11, Chainring, Teeth: 48, Speed: 11, BCD: 110, Bolts: 4, Outer, Aluminum, Black
$29.99 - $259.99
Shimano Ultegra 6800 11-Speed Inner Chainrings - Material: Aluminum - Ring Position/Type: Inner
$29.99
Shimano chainrings offer durability and confidence-inspiring performance, and go a long way towards getting a drivetrain back to optimum working condition.
$33.00
The EX1 drive train was designed specifically for the demands of electric-assist mountain bikes: a wide gear range with bigger jumps between gears and sturdy components to handle higher torque loads. Liberal use of features found on SRAM’s high end MTB parts provide high value, quiet operation and ease of service. - X-Sync (wide-narrow) tooth profiles for great chain management - Compatible with Bosch mid-drive E-bike systems - Material: Steel - Size/BCD: Direct mount - Recommended Group: EX1
$34.99 - $44.99
This direct mount chainring coincides perfectly with the Comet Modular Crank. The megatooth design allows you to put all of your power through without worrying about dropping your chain. - Long tooth profile enhances chain retention - Thick-Thin tooth design for maximum chain engagement - Laser-etched logos
$34.99
SRAM's road chainrings are stamped from 7075 aluminum for low weight and excellent strength. The teeth are ramped for precision shifting, too.
$34.99
- SRAM X-SYNC wide-tooth, narrow-tooth chainring technology provides maximum chain control - Laser-etched chainring finish is more durable - X-Range gearing technology gives you more range and a smoother gear progression, so you're always in the right gear - Improved aerodynamics for time trial and triathlon
$34.99
Eagle Technology creates the smoothest, quietest, longest lasting and most efficient drivetrains SRAM has ever made. The radical new look and feel of the X-SYNC 2 Eagle chainring is a direct result of SRAM drivetrain engineers studying the performance and wear characteristics of thousands of X-SYNC chainrings. The longer, positive-rake tooth shape has been designed to work perfectly with Eagle chains to increase chain retention and overall pedaling efficiency, while decreasing friction, noise, and wear. The complete Eagle system—crankset, chainring, chain, shifter, derailleur and cassette—is designed, tested, and proven to deliver the ultimate mountain bike drivetrain. Put simply, Eagle is capable of revolutionizing the ride for all riders on every kind of terrain. - Designed to be used with Eagle chain - Material: Steel
$34.99
- X-SYNC 2 chainring design increases chain retention, wear life, and reduces friction and noise. - Designed to be used with Eagle chain - Chainring bolts not included
$34.99
The SRAM X-Sync STEEL 1x chainrings are the perfect replacement ring for the cost conscious with added durability of steel. The same SRAM X-SYNC technology at a price well below competitors’ imitation “narrow wide” rings. Best performing chainrings at the best price. - Drivetrain Speeds: 10 , 11 - Material: Steel - Ring Position/Type: Single - Weight: 110 grams (32t), 96 grams (30t),
$34.99
- Shimano, 36T, 9 sp, BCD 104mm, 4-Bolt, Deore FC-M590, Middle Chainring, For 26/36/48, Aluminum, Black, Y1LD98090
$34.99 - $89.99
Shimano chainrings offer durability and confidence-inspiring performance, and go a long way towards getting a drivetrain back to optimum working condition.
Page 1 of 5 Next page