Skip to main content

 

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Cranksets

SRAM Rival 1 DUB Wide Crankset
Elegant and secure direct-mount X-SYNC chainrings from the company that originated the 1x drivetrain for the ultimate in consistent chain control over the long haul. - DUB bottom bracket adds durability and simplicity - Wide-chainline crankset to fit the biggest gravel tires - Longer DUB crank spindle accommodates both Road- and MTB-width bottom bracket standards for unmatched cross-compatibility across brands - Compatible with 135mm, 142mm, and BOOST rear spacing - BB not included
Wheels Manufacturing Crank Spindle Spacer
$1.99
Use these Wheels Manufacturing Crank Spindle Spacers to adjust chainline or bearing play in bottom brackets. - 24mm for Shimano Hollowtech II, FSA, Race Face EXI, SRAM GPX - 30mm for BB30, PF30, BB86, BB92 and other cranks with 30mm spindles - Machined engineering-grade Delrin - 10 spacers per bag
Wheels Manufacturing Crank Spindle Wave Washer
$2.49
Wheels Manufacturing Wave Washers help eliminate side play in cranks or pre-loaded angular contact bearings. Please refer to your crankset manufacturer's installation instructions for proper placement. - 24mm for Shimano Hollowtech II, FSA, Race Face EXI, SRAM GPX - 30mm for BB30, PF30, BB86, BB92 and other cranks with 30mm spindles - Uncompressed Thickness: 2.1mm - Compressed Thickness: 0.5mm - Spring Steel - 10 per bag
Wheels Manufacturing Freewheel/BB Spacer
$3.99
Machined aluminum spacers for freehubs. Great for fine tuning freewheel and cassette placement or improving chainline. Also good for bottom bracket spacing with BSA BB cups. - Inner Diameter: 35.0mm - Outer Diameter: 40.7mm - Material: Aluminum - Finish: Polished - Bags of 10
RaceFace Steel Outer Chainring Bolts
$4.99
- Stock steel chainring bolts found on low/mid-range Race Face cranks - For double cranksets
RaceFace M12 bolt for Respond, Chester and Ride DH
$6.99
Race Face 12mm crank bolt/puller for Respond, Chester, and Ride DH cranksets.
RaceFace M15 bolt for 2008+ Evolve and Ride
$6.99
Race Face 15mm crank bolt/puller for 2008 and newer Evolve and Ride cranksets.
RaceFace CINCH Puller Cap with Washer 18mm XC/AM
$7.99 - $8.99
Race Face CINCH Crank Puller • Puller cap for Cinch model Race Face cranks only, including Next SL, SixC and Turbine • Puller cap utilizes 16mm hex key • 26mm thread
RaceFace Cinch Drive Side Crank Bolt
$7.99
Replacement crank bolt for RaceFace Cinch cranks.
RaceFace EXI Crank Bolt - M15
$7.99
Race Face Crank Arm Fixing Bolts - For EXI Cranks - M15
Wheels Manufacturing BSA Bottom Bracket Spacer
$8.99 - $9.99
Wheels Manufacturing 2.5mm Black Aluminum Bottom Bracket Spacers are for adjusting chainline or bearing play in English (BSA) or Italian threaded bottom brackets.
FSA BB30 Crank Bolts
$9.99
- Self-extracting bolts for BB30 cranks: includes puller cap that threads into BB30 crank arms - Sold as singles
RaceFace Carbon Crank Boots
$9.99 - $199.99
Trail riding can be tough on your gear. The ends of your carbon cranks can take a lot of abuse as the trail rushes underneath you and your bike. Protect your cranks from any damage with Race Face crank boots. Made from a durable Race Face proprietary plastic blend, leave no doubt and go with the originator in crank end protection. Wrap it up and protect the tips! Compatible with: - Race Face - Next SL Cinch (G3) - Sixc Cinch - Chester - Respond - Next/Next SL (24mm Spindle) - Sixc (24mm Spindle) - Most other popular carbon MTB cranks and assorted alloy DH cranks
RaceFace Cinch Direct Mount Lockring
$9.99
- 7075-T6 aluminum direct mount spider or lockring to fit Race Face Cinch system splined cranks - RF-3296 spider is required for running 2-ring setups with Boost (Race Face 1x Direct Mount rings work fine with Boost) - Mounts using a common Park BBT-22 tool
RaceFace Next SL G4 Crank Boots
$9.99 - $13.49
Trail riding can be tough on your gear. The ends of your Next SL G4 cranks can take a lot of abuse as the trail rushes underneath you and your bike. Protect your cranks from any damage with Race Face crank boots. Made from a durable Race Face proprietary plastic blend, leave no doubt and go with the originator in crank end protection. Wrap it up and protect the tips!
SRAM M8 Capless Crank Arm Bolt Kit
$9.99
M8 Capless Crank Arm Bolt Kit - For square-taper & Powerspline
RaceFace Atlas AM Crank Bolt/Puller
$10.99
Race Face steel crank bolt/puller for Atlas AM cranks.
RaceFace Alloy Crank Boot
$12.99 - $13.99
Trail riding can be tough on your gear. The ends of your alloy cranks can take a lot of abuse as the trail rushes underneath you and your bike. Protect your cranks from any damage with Race Face crank boots - now made in a smaller version to fit most alloy MTB cranks. Made from a durable Race Face proprietary plastic blend, leave no doubt and go with the originator in crank end protection. Wrap it up and protect the tips. Compatible with: - Race Face - Turbine Cinch - Atlas Cinch - Atlas (24mm Spindle) - Turbine (24mm Spindle) - Aeffect Cinch (175mm length ONLY) - Most other popular alloy MTB cranks (except some alloy DH cranksets)
RaceFace M18 Crank Bolt - 15SX/Atlas/SixC CINCH
$12.99
Race Face Crank Arm Fixing Bolts - M18 Crank Bolt - Fits 15SX/Atlas/SixC CINCH - Self-extracting
RaceFace Cinch Crank Bolt/Puller Cap
$13.99
Replacement crank bolt and puller cap set for Race Face Cinch cranksets.
RaceFace Chainring Bolt Pack
$14.99
Race Face aluminum chainring bolts for inner chainrings. Includes four 12.5mm bolts.
RaceFace Torx Chainring Bolt/Nut Pack (Double Ring)
$14.99
Race Face aluminum Torx chainring bolt/nut set for double and triple chainrings. Includes four bolt sets.
Wheels Manufacturing 29mm ID x 2.5mm Crank Spindle Spacer, Bag of 5
$15.99
Used to adjust crank chainline or take up any slack when using 29mm (SRAM DUB) spindle cranks. - 29mm I.D. - 2.5mm thick - 5 spacers per bag - Machined engineering-grade Delrin
Wolf Tooth Crankskins
$15.99
- Some do it to protect that beautiful finish on their cranks, and some do it because they can't stand stock crankarm graphics. - Whatever your reason for wrapping and protecting a crankset, we wanted to give you an option with our branding. - These are full-wrap Crankskins that work with most cranksets One pair
SRAM Carbon Crank Arm Boot
$17.00
SRAM’s cranks are strong and tough, ready for any kind of ride. So it’s inevitable that pedal strikes and debris will chip away at the end of the crank. SRAM’s Carbon Crank Boot is an upgrade that combats the wear and tear that comes with hard riding. The boot protects the crank from surface damage and keeps the rider’s style perfectly intact. - For Descendant Carbon and non-Eagle XX1 and X01
TruVativ M15/M22 GXP Crank Arm Self-Extracting Bolts
$17.99
TruVativ Crank Arm Fixing Bolts - Monocoque carbon crankset with hollow-arm design - FSA Mega Tooth chainring design greatly improves chain retention - FSA BB392 compatibility allows use in nearly any frame - Bottom bracket not included
RaceFace M18 Crank Bolt - 15SX/Atlas/SixC CINCH/No Puller
$19.99
Race Face Crank Arm Fixing Bolts - M18 Crank Bolt - Fits 15SX/Atlas/SixC CINCH - Not self-extracting
SRAM Carbon Crank Arm Boots
$19.99
SRAM’s cranks are strong and tough, ready for any kind of ride. So it’s inevitable that pedal strikes and debris will chip away at the end of the crank. SRAM’s Carbon Crank Boot is an upgrade that combats the wear and tear that comes with hard riding. The boot protects the crank from surface damage and keeps the rider’s style perfectly in tact. - Injection molded plastic crank arm protection - Perfect way to protect your carbon crank investment from scratches and dents from pedal strikes - Material: Injection molded plastic - Recommended Group: XX1, X01, XX, X0
We The People Awake Crank Bolt
$19.99
Crank bolt for WeThePeople Awake crank.
We The People Legacy Crank Bolt
$19.99
Replacement crank bolt for WeThePeople's Legacy crank.
Page 1 of 9 Next page