Pumps/Inflation

Park's Vulcanizing Patch Kit includes 4 round patches for small holes and 2 oval patches for wider cuts; a tube of self-vulcanizing glue that bonds the patches to your tube super securely; and sandpaper for preparing the punctured area for gluing. The kit comes in a small plastic box to fit in your seat bag or pack.

The Super Patch Kit is comprised of a small plastic case, a piece of sandpaper for roughing up the tube and 6 peel-and-stick patches so no gluing is required. The patches stick fast thanks to 3M technology and they're thin and flexy to stretch with the tube. There's no easier way to patch a tube.

There’s no easier or more effective way to patch a cut tire on the road or trail than carrying and using Park Emergency Tire Boots (3 per package). These thin, extra-tough patches peel and stick to the insides of tires to repair cuts and contain the tube until you can replace the tire.

Park Tool's Pump Rebuild Kit contains one #1081 head as well as one #1087 plunger gasket for their PFP-3, PFP-6 and PFP-8 floor pumps.

Easily adapts schrader only air compressors, floor pumps, and mini pumps to work with presta valves

Topeak's Presta Valve Extender is the perfect solution for getting to those hard-to-reach valve stems. It's precision-machined from aluminum and is designed to fit deep-dish carbon and aluminum rims that have a depth of 60 to 90mm. And, it comes with an O-ring seal to ensure a leak-free fit.

Profile Design's CO2 Mounting Bracket is a small, light holder that attaches to any Profile rear-mounted drink system or under any bottle cage. Once in place, the bracket provides a handy place to carry a CO2 refill cartridge for your CO2 inflator (Profile drink system, bottles, CO2 cartridges and inflators sold separately).

You'll ride with peace of mind when you pack a can of Vittoria's Pit Stop Tire Sealant. It contains pure latex foam sealant and compressed air to quickly inflate and repair your tire so you can get on with your ride. Available in three sizes for varying tire volumes: - Road Racing: inflates 21-28-inch tubulars up to 94 psi and 700c clinchers up to 87 psi so you can ride, instead of walk to the closest pump and top off the tire to full pressure. - 75mL: Repairs and inflates low-volume MTB tires in less than a minute. - 100mL: Repairs and inflates meaty 27.5-inch tires and cross country 29-inch tires in less than a minute.

- Easy fill rate control knob. - Threaded Presta and Schrader valve compatible system. - Aluminum. - Includes 1 16g threaded CO2 cartridge.

The Micro Blast is what you need for easy inflation on the road or trail. This easy to use CO2 inflator head comes with two 16 gram threaded cartridges and a sweet little foam cartridge cover that protects from cold cartridges while in use. The simple spring push design makes it easy to inflate your Presta valved tube. - Fits all threaded CO2 cartridge sizes - Alloy mini head with threaded spring push design - Includes two 16g CO2 cartridges - Includes one reusable foam cartridge cover to fit 12g or 16g cartridges

A lightweight and efficient mini pump with a low-profile pressure gauge. T-handle provides improved comfort and efficiency. - 25mm 6063-T6 aluminum sleeved barrel. - In-line pressure gauge is accurate to within +/- 2 PSI. - Reversible valve fits Schrader and Presta valves - Thumblock lever holds securely onto valve. - Locking T-handle improves ergonomics and provides better leverage when pumping. - 222mm total length - 120 PSI maximum pressure. - 142g

Park Tool's Micro Pump is a super small micro pump that fits in just about any bag or jersey pocket or mounts directly to the frame. Ideal to take along when space and weight are an issue. Aluminum barrel with a locking dual head and soft-touch dual-density flip out handle. - Presta and Schrader valve compatible - Maximum pressure: 100 psi / 7 bars - Weight: 3.7 ounces (105g) - Length: 7 7/8" (200mm) - Includes mounting hardware to securely attach to water bottle bosses or under bottle cage

Small enough to carry along yet big enough to pump efficiently. The PMP-4.2 comes with a handy holder that bolts under a water bottle cage and holds the pump securely. All-aluminum barrel construction ensures long life and smooth operation. - Presta- and Schrader-valve compatible - Includes mounting hardware to securely attach to water bottle bosses or under bottle cage - Maximum pressure 90 PSI/6bars - Approximate weight 4.6oz/130 grams - 10.5 inches in length (265mm)

Efficient mid-high pressure mini pump with built-in extendable hose and easy-to-read dial pressure gauge. Achieves a higher maximum pressure with less effort. - 20mm 6063-T6 aluminum barrel. - 32mm dial gauge is accurate to +/- 2 PSI. - TIPFLIP reversible valve with alloy cap and alloy locking lever, fits Schrader and Presta valves. - 160mm extendable hose relieves stress on valve stems. - 268mm total length. - 110 PSI Maximum pressure. - Weight: 125g

High volume for big tires, high pressure for skinnies. Simple. The Airstick 2-stage is a durable aluminum pump with enough puff for mountain bike tires and enough pressure for road tubes too, thanks to the two-stage high pressure/high volume switch. - Presta head only - High Volume or High Pressure - Includes frame mount - 85 gr/ 3oz - 160 PSI, 11 Bar maximum

Compact and powerful, this dual-action pump helps you quickly pump up tires without breaking a sweat. The magic is in the dual-action design, which pumps air into a tire on both push and pull strokes. A great choice for road riders of all types. Details: - Dual stroke design pumps on both inward and outward strokes - AnyValve Pump Head - Tough, lightweight aluminum barrel - Ergonomic folding T-handle - Includes cage mount - 160 psi max pressure - 137g / 0.30lbs

If it was any lighter, you'd be walking home. This is the smallest pump you'll ever use that will still get your flat fixed and you on your way again. There are no extra features here. Just the bare minimum to get your tire back up and you kicking butt. Because you can't kick butt with a flat tire. - Presta head only - High Volume or High Pressure - Includes frame mount - 85 gr/ 3oz - 160 PSI, 11 Bar maximum

Inexpensive Doesn't Mean Cheap. The Core 2 pump still shares all the techy bits of its big siblings but is built for folks operating on a smaller budget. The AirTap head will function with Schrader/Presta/Dunlop valves and has an integrated bleed valve for dialing in your pressure. Our aviation-style gauge is 2.5 inches wide, and easy to read. It's also built into the base to add to the stability of the Core 2 during use. Whether you are in the basement, the garage or at the trail head, the Core 2 has you covered. - Dimensions: 4.25 x 9 x 24 inches Airtap Core Pump Head - Our AirTap reversable pump head works with Schrader, Presta or Dunlop valves and features an integrated air bleed button right at the valve for perfect pressure, every time. Aviation Guage - The 2.5-inch-wide base-mounted gauge lets you easily read your tire pressure, and adds to the footprint of the Core 2 pump's solid stance. Air Bleed - Button on the pump head to micro-adjust pressure.

Essential for your off-road adventures, this pump produces a hurricane-force air blast with its high-volume barrel. The oversized design, made from strong and lightweight aluminum, delivers more air per stroke so you can get back on the trail quickly. Details: - AnyValve pump head automatically adapts to Presta, Schrader, and Dunlop valves - Rebuildable internal parts available - Tough, lightweight aluminum barrel - Rubberized folding T-handle - Bike mount included - 90 PSI, 6.2 Bar maximum - 145g / 0.32lb

"Everyone knows that a straight line is the fastest line! That’s why Peaty's made their holeshot CO2 tyre inflator straight, rather than bent at 90 degrees. This straight line design enables faster airflow for rapid inflation, and creates less stress on your tubeless valves when you’re using it because you’re coming at the valve straight on rather than at a 90 degree angle. It's as small and lightweight as possible, so it’s easy to carry in your pocket, bag or strapped to your bike. Made from CNC’d 6061 aluminum, and with a patent-pending valve design, the details of Peaty's inflator heads have been agonised on - from the exact rubber compound of the o-rings to the awesome chris king anodized colors. KEY FEATURES: - Available in 12x Chris King colors - Unique Patent Pending compact straight line design for maximum airflow - Simply push down to inflate - Contains 1x inflator head (CO2 cartridges and freeze protector sleeve sold separately) - Presta valve compatible

A lightweight workhorse pump. Perfect for family use in the garage or to throw in the back of the car. Inflation needles optimize potential non-bike uses. - Stable (235mm x 120mm) fiber composite base - 480mm Fiber composite barrel and pump shaft - Fiber composite handle - 85cm premium quality hose - Precision 51mm mid-mounted gauge - Headrush dual connector instantly fits Presta or Schrader valves - Inflation needles included - 120 PSI Maximum pressure, suitable for most bicycle types - 750g

The Control Go mini pump series delivers high pressure or high volume air output, two-in-one hybrid manual and CO2 inflation functionality as well as an integrated gauge that measures tire pressure on the go.

- Available in 16g & 25g packs. - 5 x threaded CO2 cartridges per pack, including 1 freeze protector sleeve with unique closed base design - Packaged using recycled cardboard header cards and biodegradable bags

Reach peak inflation pressure in a flash with Topeak's Peak DX II. Its butted-aluminum barrel and folding T-handle makes pumping up tires a snap! Plus, the thumb-lock SmartHead grips tight on both Presta and Schrader valves.

A durable and accurate shock pump. - Lightweight 6063-T6 aluminum construction. - 300 PSI maximum pressure. - No-loss thread on valve ensure accurate pressure remains in shock when removed. - Double-braided hose ensures long-term durability. - Bleed valve for fine-tuning pressure. - 365mm total length. - 185g

For almost two decades, the Mammoth has established itself as a well-known standard for mountain bike mini-pumps. And with the rubberized t-handle and AnyValve head that auto-adapts to Presta, Schrader, and Dunlop valves, it’s even better than its legendary forebears. - AnyValve pump head automatically adapts to Presta, Schrader, and Dunlop valves - Rebuildable internals - Tough, lightweight aluminum barrel - Rubberized folding t-handle - Includes cage mount - 90 psi max pressure - 157g / 0.34lbs

Featuring our simple, proven spring-loaded valve design the Wayside will get your tire aired back up, no muss, no fuss. It'll work with pretty much any threaded CO2 cartridge on the market and is compatible with Presta or Schrader valves. - Thread-On Design—Hold on tight. The thread-on Presta/Schrader valve at the end of the extending flexible hose ensures that even the fiddliest of valves is held securely for inflation. - Faster Inflation—Allows for quick inflation on a road, MTB, CX, or gravel bike. - Anyvalve Pump Head—Works great on Presta, Schrader, and Dunlop valves. No leaking, no fuss, clean and simple. - 3.68oz - Lifetime warranty

The Control Gauge is a compact, lightweight, super-accurate digital gauge with a 1” digital backlit LCD display and a 360° swivel hammer head that easily attaches and detaches to Schrader and Presta valve heads at any angle.

- AutoHead technology - V-shaped ergonomic plastic handle - Durable stainless steel barrel and steady plastic base - Over-sized 3" analog gauge

The pull-out hose puts less stress on the valve. It's all very well hauling a giant pump around, but all that leverage can snap a delicate valve stem right off. This is a slimmer version of Blackburn's Core Pump that features a thread-on Presta-specific head with a short pull-out hose to give more options on where you pump from and fewer chances of your rippling muscles pulling the thing clean off. We weren't using that space in the barrel anyway, so the hose doesn't even affect the pump's efficiency. - Machined Presta valve core tool in the pump's base - Thread-on Presta valve on the extending flexible hose - Fits easily in jersey pocket or next to your bottle cage - 120 PSI - Weight: 104 grams